Models
>
GLMV169DBC
GLMV169DBC Frigidaire Microwave
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GLMV169DBC
Viewing 4 of 4
Manuals & Guides for GLMV169DBC
Click to downloadInstall
Installation Instructions
(0.52MB)
Manual
Owner's Manuals
(4.73MB)
Wiring
Wiring Diagram
(0.07MB)
Keep searches simple, eg. "belt" or "pump".
Special Order
In Stock
$26.70
The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
In Stock
In Stock
In Stock
In Stock
In Stock
$68.86
This black door latch enables the switches to make sure that the door is closed before it operates.
In Stock
$81.16
Mounting hardware sold separately. This part has been redesigned by the manufacturer and may appear different then the original.
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for GLMV169DBC
Viewing 4 of 4Door not closing properly
Fixed by these parts
How to fix it
Won’t turn on
Fixed by these parts
How to fix it
No heat
Fixed by these parts
How to fix it
Tray won’t turn
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
-
Customer:Tim from Chicago, IL
-
Parts Used:5304493153
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Timer would run but the microwave won't start
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Brent from Bend, OR
-
Parts Used:5304440323
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Broken Handle
Removed the retaining clip that keeps the door on, took the door off. Removed the plastic rim that is clipped into place. Removed old screws holding on handle and replaced.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:steve from New Bern, NC
-
Parts Used:5304440021
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Turntable stoped working
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.
Was this instruction helpful to you?
Thank you for voting!