Models > FFMV162LSA

FFMV162LSA Frigidaire Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FFMV162LSA

Viewing 4 of 4

Manuals & Guides for FFMV162LSA

Click to download
Keep searches simple, eg. "belt" or "pump".
Handle only.
In Stock
$13.10
In Stock
$18.87
Sold individually. This metallic vent hood filter collects grease particles in the air from cooking.
In Stock
This light bulb is for microwaves. Light bulb illuminates the surface below the microwave or the interior of the microwave. Because high-voltage capacitors in a microwave can retain a lethal e...
In Stock
Sold individually. Product Description Charcoal air filter works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of microwaves. This is a genuine OEM part that works for some m...
In Stock
In Stock
In Stock
$23.70
In Stock
$17.80
In Stock
$45.83
This is an OEM turntable guide with rollers, which works with microwaves.
In Stock
$38.46
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FFMV162LSA

Viewing 6 of 6
Won’t turn on
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door not closing properly
Fixed by these parts
Fixing Fixing
How to fix it
Tray won’t turn
Fixed by these parts
Fixing Fixing
How to fix it
No heat
Fixed by these parts
Fixing
How to fix it
Doesn’t shut off
Fixed by these parts
Fixing
How to fix it
Door stuck closed
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Tommy from Spring Hill, TN
Parts Used:
5304536387
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The plastice door handle broke off at the ends on the front of the microwave
Let me start by saying that this model microwave is nice, but there shouldn't be a plastic handle placed on it when it is mounted above a gas stove-top. The manufacturer should know this but I guess it was a poor decision on their part.

I popped the inside of the door off of the microwave. I then unscrewed the two screws that w ere holding the next bracket on and popped it off the door. When you take the second piece of the door off, then the glass and front come apart. You can then unscrew the two screws the hold the handle on. Replace the old handle with the new one and work back in the steps you took. A small tipped screw driver is a must.
143 of 155 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nova from Phoenix, AZ
Parts Used:
5304536387
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Microwave handle broke off
My repair worked out to be a cinch! My microwave looked very funny without it's handle. I did a little research on how to replace the handle and after popping the insert out of the inside of the microwave door, I was then able to remove the two screws that held the outside panel of the door (the part with the glass) to the part with the hinges. After removing the screws, I carefully used my trusty butter knife and screw driver to pry and pop the outside panel away. This was the most time consuming part of the job. However, once it was fully off, I unscrewed the screws that held the previous handle on and fastened the new handle with the new screws provided. Popping the door all back together was super easy. However, don't forget to put the screws back in that hold the outter panel on to the part with the hinges. :-) Good luck DIY'ers!!
37 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Maysville, NC
Parts Used:
5304536387
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
handle broken
Lifted the door up and removed entire door, took pry bar and removed the snap on plastic cover very easy. Has plastic snaps on the inside. Then removed the glass window same way. then you can see the two screws holding the handle on. Remove screws, then snap back together making sure you go slowly not to break any plastic snaps.The job wa s a lot eaiser than I thought it would be.
The replacement part was a perfect fit.
27 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!