Models > EI30BM55HSB

EI30BM55HSB Electrolux Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for EI30BM55HSB

Viewing 4 of 4

Manuals & Guides for EI30BM55HSB

Click to download
Keep searches simple, eg. "belt" or "pump".
$39.72
Sold individually.
Special Order
$26.05
The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
In Stock
Order within the next 9 hrs and your part ships today!
Special Order
In Stock
Order within the next 9 hrs and your part ships today!
In Stock
Order within the next 9 hrs and your part ships today!
This roller guide sits underneath the glass turntable tray.
In Stock
Order within the next 9 hrs and your part ships today!
Sold individually.
In Stock
Order within the next 9 hrs and your part ships today!
In Stock
Order within the next 9 hrs and your part ships today!
In Stock
Order within the next 9 hrs and your part ships today!
Hardware sold separately.
Special Order
Special Order
Sold individually.
In Stock
Order within the next 9 hrs and your part ships today!

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for EI30BM55HSB

Viewing 3 of 3
No heat
Fixed by these parts
Fixing Fixing
How to fix it
Won’t turn on
Fixed by these parts
Fixing
How to fix it
Door not closing properly
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Tim from Chicago, IL
  • Parts Used:
    5304493153
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Timer would run but the microwave won't start
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
84 of 131 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Steve from Moorhead, MN
  • Parts Used:
    5304493153
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
microwave wouldn't turn on but timer worked.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
35 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Betty from Kimball, TN
  • Parts Used:
    5304493153
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Microwave would count down but not run
After unplugging the unit remove the control face buy removing the screws. All three door switchs are on a bracket on the left. Remove the two screws holding the bracket in place and pull out. Disconnect the wires from the three switches and test each switch indivually to determine the bad one. I used a multimeter set on ohms.Replace the bad switch with the new one and replace all the wires. Reassemble the unit and you are good to go.
29 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!