Models > HMC54151UC/06

HMC54151UC/06 Bosch Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Mar 19
On Order
This door interlock switch prevents the microwave from operating when the door is open, ensuring safe use. If your microwave won’t start or shows safety issues, replacing the switch can restore proper...
In Stock
Order now and your part arrives by Mar 19
This microwave line fuse is a genuine replacement part designed to protect your appliance from power surges and overheating. It helps restore power when a blown fuse prevents the microwave from turnin...
In Stock
Order now and your part arrives by Mar 19
This coupler connects the turntable motor to the tray, allowing it to rotate for even cooking. It’s a reliable replacement for a worn or broken part and installs easily with basic tools.
In Stock
Order now and your part arrives by Mar 19
This tray rotates in the center of the microwave to help ensure the food cooks evenly. The tray sits on the coupler and had built in rollers.
In Stock
Order now and your part arrives by Mar 19
$26.26
In Stock
Order now and your part arrives by Mar 19
$6.25
This waveguide cover protects the interior of the microwave by shielding key components from food splatter and moisture. Made from durable mica material, it helps prevent sparking and keeps the applia...
In Stock
Order now and your part arrives by Mar 19
$8.76
In Stock
Order now and your part arrives by Mar 19
$8.76
The left door interlock support keeps the microwave’s door switch properly aligned so the appliance can detect when the door is fully closed and operate safely. If the switch becomes loose or misalign...
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
$15.00
In Stock
Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for HMC54151UC/06

Viewing 5 of 5
Won’t turn on
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Tray won’t turn
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Sparking
Fixed by these parts
Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing
How to fix it
No heat
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Nancy from ST AUGUSTINE, FL
Parts Used:
00617090
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Microwave was sparking
Replaced the wave cover. Unscrewed existing cover that is at the top inside the microwave. Screwed in the new cover.
Took about 30 seconds to do. Bosch service wanted over $100 for a service call plus parts and labor. Did it myself in seconds for under $10.
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Baljinder from LONG GROVE, IL
Parts Used:
00631512, 00648813, 00648812, 00614767
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Fuse blows on powering up, one door secondary switch was short
Replaced switch abdcsupports
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scot from FRUITA, CO
Parts Used:
00631513, 00631508
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Microwave would run for 30 seconds and shut off
Thermal switch on top of Magnetron was defective, spade contacts were burned and loose. New switch $6 +shipping. Removed top cover held on with several Philips head screws. Plugged unit in and gave it 30 seconds to test the fan was working, it was. Put 500ml water in cavity, ran it for 60 seconds, which after fiddling with wires it did, and got over 20C temp rise so magnetron was working (detailed instructions online). Switch is right on top of magnetron. Tried to remove spade lugs but lugs pulled out of switch so I cut the lugs off and removed the broken switch. Screwed down new switch using old hardware. Trimmed wires back and cleaned them. Used crimping tool to put on new spade lugs from car parts store. put heat shrink over lugs and wires to strain relief and buttoned the unit up. Microwave works fine and oven baked a cake so good repair.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!