Models
>
HMC54151UC/07
HMC54151UC/07 Bosch Microwave
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for HMC54151UC/07
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$6.51
This front rack support helps stabilize and securely position a rack within the appliance. Its sturdy design ensures proper alignment and safe support during loading and unloading.
In Stock
Order now and your part arrives by May 3
In Stock
Order now and your part arrives by May 3
$6.52
This microwave line fuse is a genuine replacement part designed to protect your appliance from power surges and overheating. It helps restore power when a blown fuse prevents the microwave from turnin...
In Stock
Order now and your part arrives by May 3
$14.33
This coupler connects the turntable motor to the tray, allowing it to rotate for even cooking. It’s a reliable replacement for a worn or broken part and installs easily with basic tools.
In Stock
Order now and your part arrives by May 3
$123.93
This tray rotates in the center of the microwave to help ensure the food cooks evenly. The tray sits on the coupler and had built in rollers.
In Stock
Order now and your part arrives by May 3
$6.51
This waveguide cover protects the interior of the microwave by shielding key components from food splatter and moisture. Made from durable mica material, it helps prevent sparking and keeps the applia...
In Stock
Order now and your part arrives by May 3
In Stock
Order now and your part arrives by May 3
In Stock
Order now and your part arrives by May 3
In Stock
Order now and your part arrives by May 3
$56.24
This wire rack is a sturdy metal cooking grid used inside microwave-convection and built-in oven units to support cookware and improve air circulation during cooking. It creates extra levels inside th...
On Order
$259.40
This 13.75-inch ceramic microwave tray rotates food for even heating and improved texture. Its beige finish and durable, easy-to-clean surface make it a practical addition to your microwave. Installat...
On Order
$43.79
This turntable motor is a replacement drive component designed to rotate a turntable smoothly during operation. It is commonly replaced when rotation becomes noisy, inconsistent, or stops entirely.
In Stock
Order now and your part arrives by May 3
Common Problems and Symptoms for HMC54151UC/07
Viewing 5 of 5Tray won’t turn
Fixed by these parts
How to fix it
Won’t turn on
Fixed by these parts
How to fix it
Sparking
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
No heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Nancy from ST AUGUSTINE, FL
- Parts Used:
- 00617090
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave was sparking
Replaced the wave cover. Unscrewed existing cover that is at the top inside the microwave. Screwed in the new cover.
Took about 30 seconds to do. Bosch service wanted over $100 for a service call plus parts and labor. Did it myself in seconds for under $10.
Took about 30 seconds to do. Bosch service wanted over $100 for a service call plus parts and labor. Did it myself in seconds for under $10.
Was this instruction helpful to you?
Thank you for voting!
Microwave would run for 30 seconds and shut off
Thermal switch on top of Magnetron was defective, spade contacts were burned and loose. New switch $6 +shipping. Removed top cover held on with several Philips head screws. Plugged unit in and gave it 30 seconds to test the fan was working, it was. Put 500ml water in cavity, ran it for 60 seconds, which after fiddling with wires it did,
... Read more
and got over 20C temp rise so magnetron was working (detailed instructions online). Switch is right on top of magnetron. Tried to remove spade lugs but lugs pulled out of switch so I cut the lugs off and removed the broken switch. Screwed down new switch using old hardware. Trimmed wires back and cleaned them. Used crimping tool to put on new spade lugs from car parts store. put heat shrink over lugs and wires to strain relief and buttoned the unit up. Microwave works fine and oven baked a cake so good repair.
Read less
Was this instruction helpful to you?
Thank you for voting!
Bosch HMC 80251UC microwave oven combo, unit does not working.
Bosch HMC 80251UC microwave oven combo known for its many problems. Dim LED display and others issues. This was a third round of replacing parts. Unit was working for a week. While in use the unit abruptly quit working agai. I am puzzled what else to replace now.
Replaced door switches three times. I suspect another (green Botton) sw ... Read more itch again. The whole unit is heavy and need two people to pull out of the cabinet.
Replaced door switches three times. I suspect another (green Botton) sw ... Read more itch again. The whole unit is heavy and need two people to pull out of the cabinet.
Read less
Was this instruction helpful to you?
Thank you for voting!