Models
>
LMH2235ST
LMH2235ST (00) LG Microwave Oven Combo
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for LMH2235ST
Viewing 8 of 8Keep searches simple, eg. "belt" or "pump".
$65.88
Cover the appliance?s upper front vent area with this slatted plastic grille. Its openings let air pass while the panel conceals the space behind it. Warping, cracks, or broken mounting tabs can loose...
In Stock
Order now and your part arrives by Nov 23
$13.97
This replacement incandescent lamp restores visibility in the microwave cavity or over the cooktop. The 30 watt bulb uses a screw base to connect to the light socket and provides illumination when the...
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
$35.15
Reduce cooking odors in a recirculating microwave ventilation system with this charcoal filter. Before exhaust air returns to the kitchen, activated carbon captures odors to help keep the room fresher...
In Stock
Order now and your part arrives by Nov 23
$31.85
This thermal safety thermostat is used to help protect the appliance from overheating by interrupting an electrical circuit when temperatures rise above its cutoff point. It senses heat at its mountin...
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
$26.22
Help the microwave detect whether its door is closed with this interlock switch. The latch operates a small actuator that changes the electrical contact as the door opens and shuts, supporting the saf...
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
$17.55
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be...
In Stock
Order now and your part arrives by Nov 23
$21.95
Exhaust air passes through this microwave vent damper when the ventilation fan runs. The metal flap opens with outgoing airflow to let steam and cooking odors enter the exhaust duct, then closes when ...
In Stock
Order now and your part arrives by Nov 23
$41.75
Help secure an over-the-range microwave to the kitchen wall with this microwave mounting plate. It supports the rear of the appliance and works with the upper mounting bolts to hold it firmly in place...
In Stock
Order now and your part arrives by Nov 23
$113.88
This microwave base plate trim is used to cover the lower front edge of the appliance, giving the exterior a neat, finished appearance. The decorative panel conceals the edge of the base plate and com...
In Stock
Order now and your part arrives by Nov 23
Common Problems and Symptoms for LMH2235ST
Viewing 12 of 12No heat
Fixed by these parts
How to fix it
Door not closing properly
Fixed by these parts
How to fix it
Won’t turn on
Fixed by these parts
How to fix it
Tray won’t turn
Fixed by these parts
How to fix it
Little to no heat when baking
Fixed by these parts
How to fix it
Doesn’t shut off
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Oven not heating evenly
Fixed by these parts
How to fix it
Door won’t open after self cleaning cycle
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Oven is too hot
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Joshua from WHITE LAKE, MI
- Parts Used:
- 6600W1K001D, 6600W1K001C
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Microwave would not rotate or heat up food.
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JAMES from BILLINGS, MT
- Parts Used:
- 6600W1K001D
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broken door micro switch. (unit does not start heating)
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l
... Read more
eft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from ESCONDIDO, CA
- Parts Used:
- MCR62347202
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Bezel on the fan drawer scratched. Wanted to replace
Leave the unit installed. Remove 8 screws, 4 on each side of the bottom of the drawer. It is hinged on the back but front will drop down. Remove screws attached to the white slide rails but hold bezel assembly so the spring metal on each side do no break. Look in assembly from the back to front. With a long Phillips remove the screws hold
... Read more
ing the bezel on. 3 screws. Remove old Bezel. Put new on and reassemble using the reverse.
Read less
Was this instruction helpful to you?
Thank you for voting!