This suspension spring is a genuine OEM replacement part for a variety of washers and washer-dryer combos. The primary purpose of the suspension spring is to support the outer tub and keep the tub ste...
This bolt is a genuine OEM replacement part, used to secure the agitator in your washing machine. Overtime the bolt can become worn out due to the vibrations of the washer, and will need to be replace...
On the lid on your washing machine there is a pin that engages with the lid switch. This works by telling the machine that the lid is closed which then allows for the washer to start. If your washer i...
The thrust spacer is a genuine OEM part that is more commonly known as a retainer ring. The spacer is made of white plastic and measures approximately 2.5 inches in diameter. This part is found in bet...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.
In Stock
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
March 29, 2023
Hello,
The washer was spinning slow, so I replaced the clutch. It worked better for a while, but after a few loads, its starting to slow down again.
(It seems a little out of balance. It seems to spin okay at first but then slows down.) The clothes are still a little dripping wet.
For model number MVWC300VW1
Hi Ron, thank you for reaching out. According to our research, you may need to check the drain hose for clogging. We recommend checking the following parts to fix this issue: direct drive heavy-duty coupling, part number FIX1485647, and basket drive assembly with clutch, part number FIX11723156. We hope this solves your problem!
My washer stopped working. I replaced the lid switch. It is full of water from when the cycle stopped. If I place pressure on the load size selector nob it continues to fill. I don’t hear anything from the timer
For model number MVWC300VW1
Hello Mitchell, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the timer, part number FIX11749597, to solve the problem. Glad to be of assistance!
I removed the two screws on the back of the control panel. The control panel then flips back. The switch is on the left side. To remove the switch, I first detached the wire to the control panel and unscrewed the grounding wire. The new switch drops right in. I had a little trouble getting it in until I realized the washer lid had to
... Read more be open. A little awkward but once it's in you can shut the lid and then I reattached the wire from the control panel and screwed in the grounding wire. Pretty easy. $20 for the part (with shipping) and 15 minutes. Way cheaper than a repairman.
contacted "just answer" on web. they diagnosed problem and suggested repair part. Ordered part from "part select". Great service and fast shipping from part select. Replaced part in 15 minutes and up and running! :)
