Models > WM6998HBA

WM6998HBA (ABLEEUS) LG Washer Dryer Combo

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WM6998HBA

Viewing 4 of 4
Cabinet And Cabinet Cover Assembl Diagram and Parts List for ABLEEUS LG Washer Dryer Combo
Cabinet And Cabinet Cover Assembl
Dispenser And Drawer Panel Assembly Diagram and Parts List for ABLEEUS LG Washer Dryer Combo
Dispenser And Drawer Panel Assembly
Drum And Tub Assembly Diagram and Parts List for ABLEEUS LG Washer Dryer Combo
Drum And Tub Assembly
Duct Assembly Diagram and Parts List for ABLEEUS LG Washer Dryer Combo
Duct Assembly
Keep searches simple, eg. "belt" or "pump".
Locking Pin – Part Number: 4774FR3118B
$21.82
The locking pin is used to hold the shock absorber on the washer. There is a pin used at the bottom and top of the shock absorber. Sold individually.
Special Order
Clamp Assembly – Part Number: ACA56078801
$21.82
In Stock
Order now and your part arrives by Aug 17
Clamp – Part Number: 4861FR3068A
$15.26
In Stock
Order now and your part arrives by Aug 17
Washer Switch Assembly – Part Number: EBF61315802
$140.32
If your washer isn’t locking or starting like it should, this replacement door lock switch could be the fix you need. It helps your machine know when the door is closed so it can lock and begin the cy...
In Stock
Order now and your part arrives by Aug 17
Washer Gasket – Part Number: MDS62058301
$48.21
This part is the replacement rear tub gasket for your washer. It is made of black plastic and is approximately 3-1/4 inches in diameter. The rear tub gasket forms a watertight seal between the rear tu...
In Stock
Order now and your part arrives by Aug 17
CAP,DRAIN HOSE – Part Number: 5006EN3015A
$11.98
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
In Stock
Order now and your part arrives by Aug 17
Bolt Assembly – Part Number: 4040FR4051C
$21.82
In Stock
Order now and your part arrives by Aug 17
Tub Bearing – Part Number: 4280FR4048N
$66.86
This genuine washing machine tub bearing helps support the inner drum and allows it to rotate smoothly during wash and spin cycles. Designed to reduce friction and maintain proper drum alignment, it c...
In Stock
Order now and your part arrives by Aug 17
Ball Bearing – Part Number: 4280FR4048Z
$98.47
This washer bearing and seal set supports the drum’s rotation and protects internal components from water damage. The bearing ensures smooth, quiet operation by reducing friction and vibration, while ...
In Stock
Order now and your part arrives by Aug 17
HEATER ASSEMBLY – Part Number: AEG73309907
$110.60
This heater assembly is a vital component for LG washing machines, designed to heat water to the correct temperature for optimal cleaning performance. It features an integrated thermistor (sensor prob...
In Stock
Order now and your part arrives by Aug 17
Motor Stator Bolt – Part Number: 4011FA4353B
$15.26
In Stock
Order now and your part arrives by Aug 17
Clamp – Part Number: 4860FR3092C
$21.82
In Stock
Order now and your part arrives by Aug 17
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WM6998HBA

Viewing 6 of 6
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Locking Issues
Fixed by these parts
Fixing
How to fix it
Lid or door won’t close
Fixed by these parts
Fixing
How to fix it
Spinning Issues
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing
How to fix it
Replacing the Washer Switch Assembly

Replacing the Washer Switch Assembly

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
CURTIS from OLIVE BRANCH, MS
Parts Used:
EBF61315802
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Washer did not recognize the door was shut
I removed the Wire and spring from the tub seal and then removed the seal on the side of the washer that contains the Door switch. I removed the two screws that held the door switch in place while holding the switch with my other hand. Once the screws where out I pulled the switch assembly out thru the gap and removed the wires from old assembly. I then plugged the wires into the new assembly aligned the holes up and put the screws back in the new door switch assembly. I then put the door seal and tub seal holder back on. This took about 15 minutes. I do recomend that you unplug the washer before starting this process.
Read less
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andrew from BOTHELL, WA
Parts Used:
AEG33121501
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
TE error. Replaced heater / thermistor assembly.
removed top and front. heater is at the base of the tub. the nut compresses the rubber seal and may take some wiggling to remove the old one.
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from SUGAR GROVE, OH
Parts Used:
MDS62058301
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
water & soap leaked into / on the tub bearings causing Bearing failure
pretty straight forward repair,lots & lots of parts to clean :-)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More