Models > WM3600HWA

WM3600HWA (ABWEUUS) LG Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WM3600HWA

Viewing 3 of 3
Cabinet And Control Panel Assembly Diagram and Parts List for ABWEUUS LG Washer
Cabinet And Control Panel Assembly
Dispenser Assembly Diagram and Parts List for ABWEUUS LG Washer
Dispenser Assembly
Drum And Tub Assembly Diagram and Parts List for ABWEUUS LG Washer
Drum And Tub Assembly
Keep searches simple, eg. "belt" or "pump".
Washer Hose with Bellows – Part Number: 4738ER1004B
$42.85
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
In Stock
Order now and your part arrives by May 29
Shock Absorber Assembly – Part Number: ACV72909503
$55.18
Keep your washer steady and quiet with this replacement friction damper assembly. It helps absorb vibrations and stabilize the drum, especially during fast spin cycles. If your machine is shaking or m...
Special Order
Locking Pin – Part Number: 4774FR3118B
$21.82
The locking pin is used to hold the shock absorber on the washer. There is a pin used at the bottom and top of the shock absorber. Sold individually.
Special Order
Washer Hinge Spring – Part Number: 4970FR2084Z
$48.21
In Stock
Order now and your part arrives by May 29
Clamp Assembly – Part Number: ACA56078801
$21.82
In Stock
Order now and your part arrives by May 29
BOLT ASSEMBLY – Part Number: FAA31690703
$19.63
Special Order
Clamp – Part Number: 4861FR3068A
$15.26
In Stock
Order now and your part arrives by May 29
BOLT ASSEMBLY – Part Number: FAA31690704
$18.54
In Stock
Order now and your part arrives by May 29
GASKET – Part Number: MDS66290801
$142.61
This rubber gasket seals the door on your LG front-load washer to keep water from leaking out during cycles. If you’re noticing puddles, mildew smells, or moisture around the door, replacing the gaske...
On Order
Hose – Part Number: 4738ER2002A
$48.21
In Stock
Order now and your part arrives by May 29
Bolt Assembly – Part Number: 4040FR4051C
$21.82
In Stock
Order now and your part arrives by May 29
Leg Assembly – Part Number: AFC72755401
$29.98
This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can...
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WM3600HWA

Viewing 4 of 4
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Spinning Issues
Fixed by these parts
Fixing Fixing
How to fix it
Shaking and Moving
Fixed by these parts
Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing Fixing
How to fix it
Replacing the Washer Hose with Bellows

Replacing the Washer Hose with Bellows

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
mark from AUBURN, CA
Parts Used:
4738ER1004B
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
LG washing machine flooded the Landry room.
Wife called me and said the washing machine just flooded the Landry room. I looked at it and didn't see anything wrong. Took the top off and the back off and started looking for a leak, did not see anything. Took the front part of the washer apart thinking the drain hole was plugged up where the rubber boot is. It was ok after taking the big rubber boot off or whatever that is called i was not getting anywhere. I put it back together left the top and the back off. I turned the water on and started the washer on a quick cycle looking for a leak. I found the bellows at the inlet had a small leak fixed that and started the washer again. So what i found out was the clean out drain plug was not in tight letting water out as it was washing after i tightened it all was ok. So i did find a leak that was small that we never saw. The hardest part was putting that wire clamp on the rubber boot it took two people to do that.
Read less
12 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phillip from SOUTH PARK, PA
Parts Used:
MHY62964802
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Spring broke that holds the drum up.
To put the new spring on requires two people. One to pull the drum up as far as possible and hold it in place and the other to attach the spring to the drum and the into the slot on the side of the washer frame. It takes a lot of leverage and strength to get the spring into the slot. We used a screw driver as leverage to get the spring ex tended to slip into the slot. You might also need the plastic holder part# 4930FR3040A. If the washer door boot has come off due to spring breaking, you will need to reset it. That requires also removing front panel. There is a large wire ring that holds the boot in place. You either need a special pair of pliers to expand the spring to reset the boot or a lot of strength to do it with a couple screw drivers.
Read less
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marcia from TROY, OH
Parts Used:
5221ER1003S
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
Water inlet valve relacement
Installed correctly but PartsSelect sent WRONG part, but part number on bag was correct. Installation of WRONG part fried the main board. A $100 fix is now costing me about $1300.00 for technician service and new unit. I asked PartsSelect to help with cost since outcome is due to their error. Totally unsatisfied. Will not suggest company to other DIYers.
Read less
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More