Models > BVM200FE

BVM200FE Poulan Leaf Blower / Vacuum

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for BVM200FE

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
This fuel filter is for lawn and garden equipment engines. Fuel filter cleans the fuel before it reaches the carburetor. Work in a well-ventilated area when installing this part. Drain the fuel...
In Stock
Order within the next 49 mins and your part ships today!
This chainsaw fuel line kit carries fuel from the tank into the carburetor and from the primer bulb to the fuel system. This part is mostly used on gas trimmers and blowers. The fuel lines are made fr...
In Stock
Order within the next 49 mins and your part ships today!
This is a tank purge line, also known as a fuel line kit, and it is used with various lawn equipment. The line connects fuel from the tank into the carburetor, and from the primer bulb back into the f...
In Stock
Order within the next 49 mins and your part ships today!
This is a spark plug for your lawn equipment. This part ignites the air and fuel mixture in the cylinder of the engine to power your machine. If the tip of the spark plug is burnt out or damaged it is...
No Longer Available
In Stock
Order within the next 49 mins and your part ships today!
$6.21
In Stock
Order within the next 49 mins and your part ships today!
In Stock
Order within the next 49 mins and your part ships today!
Impeller Kit
In Stock
Order within the next 49 mins and your part ships today!
In Stock
Order within the next 49 mins and your part ships today!
$18.68
In Stock
Order within the next 49 mins and your part ships today!

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Abj
March 27, 2024
I have a poulan pro gas leaf blower bvm200fe 25cc 200mph, and I've been searching for a replacement air box with not luck and during my search I found out that the part is OBSOLETE an nobody has it. Wat can or do I do or put in place of the air box? I can't even find used ones...
For model number BVM200FE
Fix.com logo
Hello Abj, Thank you for your inquiry. Checking your model, we do have an airbox cover listed as available part# FIX9482683. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:

Common Problems and Symptoms for BVM200FE

Viewing 2 of 2
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Engine stops after a few seconds or minutes
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Victor from SCOTTSVILLE, KY
Parts Used:
530069247, 530069216, 530095646
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Both the Fuel line and the Engine fuel line, where dry rotted.
1) While still attached to the fuel tank, I first sized up the old fuel lines with the newer fuel lines.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fa ll into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
34 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Casper from ERATH, LA
Parts Used:
530069247, 530069216, 530095646
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Fuel and Purge lines had disintegrated
Disassembled it and cleaned fuel tank. Cut and ran new fuel lines, installed filter and reassembled. Parts fit perfectly and got running after not running for over 20 years.
19 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!