4014NV Makita Leaf Blower / Vacuum - Parts

Carbon brushes are needed to conduct electricity to the armature through the commutator. The brushes are continuously rubbing against the rotating commutator, so will wear down over time, and will nee...

This is a power cord, and it is used with several power tools. It is made of a thick rubber that is tough, and insulated for a long life. It has two 18 gauge wires, and is 8 feet long. When removing y...

This is a cord guard, also known as a strain reliever, for your power tools. Power tool cords go through a lot of stress during usage, and this part is designed to remove some of that stress from the ...

Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating par...

This is a Genuine OEM replacement part designed for use with Makita Power Tools. It is Sold Individually. This metal Pan-Head Phillips Screw includes a washer. It is used in a variety of applications based on your tool.

Manufacturer sourced replacement part designed for use on Makita power tools. The purpose of the brush cap is to hold the brush in the tool. This cap has external threads that thread into the housing ...

This manufacturer sourced replacement pin is made out rubber and it is sold individually. It acts as a cushion/spacer in a variety of Makita power tools. This is a standard piece of hardware and it ha...

This pan head screw is a genuine replacement hardware sourced directly from original equipment manufacturer. It is specially produced for use with a variety of power tools. Please make sure to check a...

This is an authentic OEM approved replacement item commonly used on Makita power tools. Bearings have many useful applications that will differ depending on a tool. Ball bearings are designed to minim...

Genuine Makita replacement part. This pan-head phillips screw includes a washer. It is sold individually.

This authentic Makita part is guaranteed to fit the blowers listed below. This assembly includes one (1) nozzle and one (1) joint connector piece (also available separately as part # 414145-2). This i...

This is an original replacement part manufactured for use with Makita blowers. The plastic joint is used to secure the nozzle to the fan housing. No tools are required to install the joint, and it is sold individually.