Models > UT09510

UT09510 Homelite Leaf Blower / Vacuum

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for UT09510

Viewing 2 of 2
Page A Diagram and Parts List for Homelite Leaf Blower / Vacuum
Page A
Page B Diagram and Parts List for Homelite Leaf Blower / Vacuum
Page B
Keep searches simple, eg. "belt" or "pump".
PRIMER BULB – Part Number: 561635001
$6.51
This is an OEM primer bulb, and it is sold individually. Pressing the bulb removes the air out of the carburetor. Fuel is then forced from the fuel tank, which flows through the fuel line and into the...
In Stock
Order now and your part arrives by May 14
Spring – Part Number: 638033001
$6.51
This spring or container fits gardening tools such as a trimmer. The spring works to recoil a starter rope. If your spring has been worn out, it can lose tension and even break. If the spring breaks, ...
In Stock
Order now and your part arrives by May 14
Line Trimmer Carburetor – Part Number: 308054043
This carburetor is for line trimmers. Carburetor mixes air and gas before the fuel mix goes to the engine. Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
No Longer Available
Choke Lever – Part Number: 518824001
Genuine OEM replacement part, this item is sold individually. This part is used on the carburetors on the outdoor power equipment listed below. Because this part is used quite frequently it has a tend...
No Longer Available
Starter Handle – Part Number: PS06114
Ergo grip starter handle
No Longer Available
HEAT DAM – Part Number: 518920001
$6.51
Genuine Manufacturer Sourced replacement part used on certain Hedge Trimmers and Blowers. This part is made out of Plastic and it is Sold Individually. Heat Dam acts as a spacer for carburetor allowing it to stay cool.
In Stock
Order now and your part arrives by May 14
Heat Dam Gasket – Part Number: 901552002
Genuine Manufacturer Sourced replacement part used on Blowers/Vacuums and String Trimmers. This part is made out of Composite Material and it is Sold Individually. This Gasket provides an Air Tight Se...
No Longer Available
Ignition Module – Part Number: 850108009
It is an authentic OEM sourced replacement part designed for use with Homelite and Ryobi string trimmers and backpack blowers. This ignition module also known as an armature-magneto produces pulses of...
No Longer Available
STARTER PULLEY – Part Number: 521316001
$6.51
This manufacturer approved replacement starter pulley is designed for use with gas blowers/vacuums. This recoil pulley is susceptible to a normal wear due to constant wear and will eventually require ...
In Stock
Order now and your part arrives by May 14
Screw, Truss Hd. - (10-24 X 2.188) – Part Number: PS03999
This is a genuine OEM sourced replacement part that is intended to be used with trimmers and pruners from Homelite and Ryobi. The metal screw is commonly used to fasten the muffler assembly to the cyl...
No Longer Available
Starter Rope 42 In. – Part Number: 900849012
$6.51
This is a genuine replacement part that is manufactured for use with outdoor power equipment. This nylon rope wraps around the starter recoil, and is pulled by the user to start the engine. The starte...
In Stock
Order now and your part arrives by May 14
MOMENTARY CONTACT SWITCH – Part Number: 760338004
$2.99
This is an authentic OEM sourced replacement momentary contact switch. It is specially designed for Homelite and Ryobi blowers and vacuums. It is the part of the tool handling on and off function of t...
In Stock
Order now and your part arrives by May 14
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Replacing the PRIMER BULB

Replacing the PRIMER BULB

Replacing the Primer Bulb

Replacing the Primer Bulb

Replacing the Spring & Container

Replacing the Spring & Container

Replacing the Spring

Replacing the Spring

Replacing the Starter Rope 42 In.

Replacing the Starter Rope 42 In.

Replacing the MOMENTARY CONTACT SWITCH

Replacing the MOMENTARY CONTACT SWITCH

Replacing the Momentary Contact Switch

Replacing the Momentary Contact Switch

Replacing the Heat Dam

Replacing the Heat Dam

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
edward from ALLEN, TX
Parts Used:
308054043
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
didn't keep running
removed outer cover, remove old gas lines from carburetor and gas tank. Unscrewed (2) screws holding carburetor. Making certain not to damage gasket under carburetor then installed carburetor using same gasket and screws that held it before. Tightened to snug fit. Installed new gas lines, and cover over carburetor.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More