Models > PB-261L

PB-261L (02001001-02999999) Echo Leaf Blower / Vacuum

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PB-261L

Viewing 9 of 9
Keep searches simple, eg. "belt" or "pump".
Replacing the spark plug should be part of your regular maintenance. How often to replace it depends on your model but is generally changed at least once a year or more, depending on use. When a spark...
In Stock
Order now and your part arrives by Mar 19
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
Order now and your part arrives by Mar 19
This is a primer pump or primer bulb, and it is used on various outdoor lawn equipment. This part has an outer diameter of 0.616 inches, it is dome shaped, and transparent. The primer pump gives the e...
In Stock
Order now and your part arrives by Mar 19
This is an OEM fuel filter and is sold individually. This repair is very easy and will only take a few minutes. It is also a very important maintenance task that should be done regularly. This part is...
In Stock
Order now and your part arrives by Mar 19
This is a single filter designed to be used in various model-types, ranging from trimmers, edgers, and blowers (to name a few). A well-maintained filter is an essential part to keeping your equipment ...
In Stock
Order now and your part arrives by Mar 19
This is a genuine OEM replacement part, it is sold individually. This steel washer is used in several locations on the Outdoor Products shown below. It aids in securing internal parts of these products.
In Stock
Order now and your part arrives by Mar 19
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
In Stock
Order now and your part arrives by Mar 19
This item includes one genuine backpack blower strap and the mounting hardware needed to attach it. Your backpack blower has two of these straps, however they are sold individually. The strap is used ...
In Stock
Order now and your part arrives by Mar 19
This is a genuine replacement part sourced from original manufacturer for use with handheld gas trimmers and blowers. Spark arrester fits inside of the muffler and it helps to prevent the emission of ...
In Stock
Order now and your part arrives by Mar 19
This Genuine OEM screw is a standard replacement part used on a variety of gas-powered trimmers and brushcutters. Constructed from durable metal and sold individually, this screw is typically used to ...
In Stock
Order now and your part arrives by Mar 19
$6.25
This is an Authentic Manufacturer Sourced replacement part designed for use with a variety of Backpack Blowers. This part is made out of Plastic and it is Sold Individually. This item helps to secure ...
In Stock
Order now and your part arrives by Mar 19
Genuine OEM replacement part, this item is sold individually. This gasket acts as a seal to keep air and debris from entering the engine. Over time gaskets will compress and breakdown and then need replacement.
In Stock
Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Keith from NORWOOD, NJ
Parts Used:
A369000460
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
24 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
christopher from HADDON HGTS, NJ
Parts Used:
C625000000
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Bracket that attaches throttle, clean break.
Was as easy as reassembling in reverse of disassemble.
Always helps to snap a pic first.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Benny from BURTON, MI
Parts Used:
89011804262
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Added extra decals to the tube
Ordered two extra Echo Decals for the front tube. Original was not installed correctly from factory. So I added two extra to make it look better. This was for my ECHO 8010T Leaf Blower. Nice machine..
It looks real nice with four decals on the end..
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!