Models
>
13AN785S001
13AN785S001 (2013) Yard Man Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 13AN785S001
Viewing 9 of 9
Keep searches simple, eg. "belt" or "pump".
$37.49
This mower blade is designed for use on 42-inch cutting decks and supports efficient grass cutting for bagging or side-discharge applications. Its durable construction and balanced design help deliver...
In Stock
Order now and your part arrives by Jul 24
$9.21
This part includes one hex flange nut that is compatible with various outdoor equipment. It has a thread of 5/8-18 and consists of a hex nut with a wide flange on one end. The flange works like a wash...
In Stock
Order now and your part arrives by Jul 24
$15.11
This is a genuine OEM sourced replacement belt cover designed for riding lawn mowers and tractors. It is attached to the top of the mower deck to cover and protect the mandrel pulley and the belt. Thi...
In Stock
Order now and your part arrives by Jul 24
This is a pan head screw generally used to secure the steering shaft of a riding lawn mower/tractor. Over to due to constant pressure on this bolt it may break or the threads might strip down allowing...
In Stock
Order now and your part arrives by Jul 24
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
Order now and your part arrives by Jul 24
Special Order
In Stock
Order now and your part arrives by Jul 24
In Stock
Order now and your part arrives by Jul 24
On Order
$37.29
This item has been sourced from the original manufacturer to be used with riding lawnmowers from Yard Machines, Bolens, Yard-Man, MTD, and Troy-Bilt. The metal steering gear links the steering shaft p...
On Order
$6.51
This item is a genuine OEM replacement part that is intended to be used with snowthrowers and lawnmowers from Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The metal hex head screw is us...
In Stock
Order now and your part arrives by Jul 24
$6.55
This is an original Craftsman replacement part. The carriage screw is designed by the manufacturer for use in snowblowers and lawn tractors. This part is made of metal, and may be found in various l...
In Stock
Order now and your part arrives by Jul 24
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- J. Alonzo from TULALIP, WA
- Parts Used:
- 783-06424A-0637
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
1 deck belt cover fell off and the other rusted and loosening
Removed the retaining screws on both belt covers and replaced them with the new ones i purchased.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerry from GRAND BAY, AL
- Parts Used:
- 783-06424A-0637
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Belt guards broken
Replaced belt guards. Bended in center plates to keep the belts from slipping off. Works like a charm
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from TRIANGLE, VA
- Parts Used:
- 954-04208A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Wrench set
upper transmission belt cracked bad
Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ... Read more ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ... Read more ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Read less
Was this instruction helpful to you?
Thank you for voting!