Models
>
13WX78KS066
13WX78KS066 (Bronco -2011) Troy-Bilt Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 13WX78KS066
Viewing 9 of 9_(2011)_WW_1.gif "Page A Diagram and Parts List for Bronco -2011 Troy-Bilt Lawn Tractor")
_(2011)_WW_2.gif "Page B Diagram and Parts List for Bronco -2011 Troy-Bilt Lawn Tractor")
_(2011)_WW_3.gif "Page C Diagram and Parts List for Bronco -2011 Troy-Bilt Lawn Tractor")
_(2011)_WW_4.gif "Page D Diagram and Parts List for Bronco -2011 Troy-Bilt Lawn Tractor")
_(2011)_WW_5.gif "Page E Diagram and Parts List for Bronco -2011 Troy-Bilt Lawn Tractor")
_(2011)_WW_6.gif "Page F Diagram and Parts List for Bronco -2011 Troy-Bilt Lawn Tractor")
_(2011)_WW_7.gif "Page G Diagram and Parts List for Bronco -2011 Troy-Bilt Lawn Tractor")
_(2011)_WW_8.gif "Page H Diagram and Parts List for Bronco -2011 Troy-Bilt Lawn Tractor")
_(2011)_WW_9.gif "Page I Diagram and Parts List for Bronco -2011 Troy-Bilt Lawn Tractor")
Keep searches simple, eg. "belt" or "pump".
$6.51
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: ...
In Stock
Order now and your part arrives by Mar 30
$6.51
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...
In Stock
Order now and your part arrives by Mar 30
$78.78
This genuine Steering Shaft is designed to fit all the Lawn Tractor models listed below. It features a 5/8" spline and measures 21.86 inches in length, ensuring a precise fit and reliable performance....
In Stock
Order now and your part arrives by Mar 30
$74.85
This is an OEM deck engagement cable, sold as one part. This part is for a lawnmower and its purpose is to engage the mowers blade, allowing you to control your engine zone. It consists of a metal wir...
In Stock
Order now and your part arrives by Mar 30
$59.43
This is a Genuine Manufacturer Approved replacement V-Belt used on Riding Lawn Mowers. This part is made out of Rubber and it is sold individually. This is the Belt that drives the Blades. Clean the p...
In Stock
Order now and your part arrives by Mar 30
This is a manufacturer-approved replacement flange bearing for a lawn tractor. It is sold individually. The function of this part is to help secure the axle assembly to the pivot axle. It also allows ...
In Stock
Order now and your part arrives by Mar 30
Special Order
$29.98
This is a lock ball joint assembly for your lawn tractor. The ball joint assembly connects to the pitman arm and the drag link, and is a part of the steering mechanism on your machine. This part is 7/...
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
$7.63
This is a high-quality OEM hex flange bearing for use in riding lawn tractors (sold individually). This part has multiple applications, so the location and repair information may differ depending on t...
In Stock
Order now and your part arrives by Mar 30
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
Order now and your part arrives by Mar 30
$42.85
Genuine OEM Idler Mandrel Pulley Kit which includes: pulley, spacer/washer and a bushing. This part spins the blade on the mower deck of the tractor. The bearing for this pulley is not sold separately...
In Stock
Order now and your part arrives by Mar 30
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- J. Alonzo from TULALIP, WA
- Parts Used:
- 783-06424A-0637
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
1 deck belt cover fell off and the other rusted and loosening
Removed the retaining screws on both belt covers and replaced them with the new ones i purchased.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerry from GRAND BAY, AL
- Parts Used:
- 783-06424A-0637
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Belt guards broken
Replaced belt guards. Bended in center plates to keep the belts from slipping off. Works like a charm
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from TRIANGLE, VA
- Parts Used:
- 954-04208A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Wrench set
upper transmission belt cracked bad
Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ... Read more ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ... Read more ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Read less
Was this instruction helpful to you?
Thank you for voting!