Models > 72045

72045 (8900400-8999999 - 1998) Toro Lawn Tractor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 72045

Viewing 31 of 31
Keep searches simple, eg. "belt" or "pump".
This is a lock nut and it is used in a variety of outdoor lawn equipment. This lock nut has a nylon insert, making it a nyloc nut. The insert allows the nut to be resistant to turning caused by strong vibrations.
In Stock
Order now and your part arrives by Apr 2
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It ...
In Stock
Order now and your part arrives by Apr 2
This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it bec...
In Stock
Order now and your part arrives by Apr 2
It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust ...
In Stock
Order now and your part arrives by Apr 2
$14.23
It is a genuine item that is supplied by the original equipment manufacturer for use with Toro lawn mowers and garden tractors. This is an identical replacement for a missing or a damaged cap-hub that...
In Stock
Order now and your part arrives by Apr 2
This is a screw for your lawn equipment. Most commonly used to secure the half-rotor to the blade in your machine. This part is a hex bolt, and requires a nut or a tapped hole.
In Stock
Order now and your part arrives by Apr 2
$6.51
It is made of metal and is sold individually. The screw connects to the idler pulley. A socket set might be needed during the installation process. Over time this part may become stripped and will nee...
In Stock
Order now and your part arrives by Apr 2
This carriage screw is a genuine manufacturer sourced replacement part. It is specially designed for use with Toro snowblowers. This screw is generally used to secure the scraper blade. The square are...
In Stock
Order now and your part arrives by Apr 2
This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams ...
In Stock
Order now and your part arrives by Apr 2
It is a genuine item that is supplied by the original equipment manufacturer for use with riding lawn mowers and garden tractors. This is an identical replacement for a missing or damaged brake pads t...
In Stock
Order now and your part arrives by Apr 2
This is an authentic replacement part that is supplied directly from original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The ignition module al...
No Longer Available
$6.51
This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your ...
In Stock
Order now and your part arrives by Apr 2

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dana from HAMMOND, IN
Parts Used:
792006
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!