Models > 71285

71285 (240000001-240999999 - 2004) Toro Lawn Tractor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 71285

Viewing 26 of 26
Keep searches simple, eg. "belt" or "pump".
No Longer Available
Fuel Filter
In Stock
In Stock
In Stock
In Stock
This is a lock nut and it is used in a variety of outdoor lawn equipment. This lock nut has a nylon insert, making it a nyloc nut. The insert allows the nut to be resistant to turning caused by strong vibrations.
In Stock
In Stock
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It ...
In Stock
This is a replacement cylinder head gasket for your small engine. It is approximately 5 inches in width and 6 inches in length. The cylinder head gasket helps to create a seal for the cylinder head. I...
In Stock
In Stock
This authentic manufacturer sourced replacement part is designed for use with lawn and garden engines. The starter motor provides an initial motion, engage the flywheel to start the engine. This start...
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Michelle from AYLETT, VA
Parts Used:
63-8360
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
8 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Emanuel from FERRIDAY, LA
Parts Used:
794683
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mow er with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!