Models > 71242

71242 (240000001-240999999 - 2004) Toro Lawn Tractor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 71242

Viewing 26 of 26
Keep searches simple, eg. "belt" or "pump".
No Longer Available
Fuel Filter
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
This is a self threading bolt designed for snowblowers. This OEM part is sourced directly from the original manufacturer. It is sold individually and has a thread of 5/16-inches. The self threading bo...
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
This is a lock nut and it is used in a variety of outdoor lawn equipment. This lock nut has a nylon insert, making it a nyloc nut. The insert allows the nut to be resistant to turning caused by strong vibrations.
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It ...
In Stock
Order within the next 3 hrs and your part ships today!

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
D. from MILTON, WI
Parts Used:
99-6837
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Attaching the upper part of the cable
EZ if you first remove the gas tank. Take off the LH retainer screw (carb side) but just loosen the RH screw (it's hard to get back in). The retainer will swing out of the way and tank can be removed. Also take a good look at the rubber gas line and replace if needed (really easy and cheap).

When you get the tank out of the way, everything's right there.for cable installation,
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michelle from AYLETT, VA
Parts Used:
63-8360
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
8 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Emanuel from FERRIDAY, LA
Parts Used:
794683
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mow er with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!