All Installation Instructions for Toro Lawn Tractor 71219

Customer:: Rene from COVINGTON, LA
Parts Used:: 691751, 690822
Difficulty Level:: Really Easy
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Socket set, Wrench set

Stopped running. Turned to be a bent intake push rod and broken rocker arm

Removed head. Replaced both rocker arms, intake pus rod, push rod guide exhaust and head gaskets. Torqued head in 3 stages to 216 in/lbs. gapped intake to .004 and exhaust to .006 at TDC

Added oil and gas. Now running great

If you need to replace push rods use steel (exhaust) they are the same length
The engine was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Michelle from AYLETT, VA
Parts Used:: 63-8360
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Grandson lost the ignition key to my Toro!

No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.

14 of 35 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: D. from MILTON, WI
Parts Used:: 99-6837
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Socket set

Attaching the upper part of the cable

EZ if you first remove the gas tank. Take off the LH retainer screw (carb side) but just loosen the RH screw (it's hard to get back in). The retainer will swing out of the way and tank can be removed. Also take a good look at the rubber gas line and replace if needed (really easy and cheap).

When you get the tank out of the way, everything's right there.for cable installation,

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

71219 (8900001 - 8999999) Toro Lawn Tractor - Instructions