Models
>
1691033
1691033 Simplicity Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 1691033
Viewing 14 of 14
Keep searches simple, eg. "belt" or "pump".
$10.40
This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distribut...
In Stock
Order now and your part arrives by Mar 22
$9.60
This is a genuine OEM sourced replacement part for Lawn and Garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It will have different applications...
In Stock
Order now and your part arrives by Mar 22
$6.25
This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the p...
In Stock
Order now and your part arrives by Mar 22
$7.18
This is an authentic OEM sourced replacement component which is specially made for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications, please make ...
In Stock
Order now and your part arrives by Mar 22
$6.25
It is a standard hardware which may have multiple applications. This is a genuine OEM sourced cotter pin designed for use with Murray, Simplicity, and Snapper lawn tractors. It is an identical replace...
In Stock
Order now and your part arrives by Mar 22
These are authentic replacement parts that are supplied directly from the original equipment manufacturer for use with Murray and Simplicity lawn and garden tractors. This is the ignition switch which...
In Stock
Order now and your part arrives by Mar 22
$7.08
This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to...
Special Order
In Stock
Order now and your part arrives by Mar 22
This is a nut for your lawn and garden equipment. The diameter is 5/16 inches with a thread size of 18. The nut has a washer like base, with a wide flange to ensure it will not loosen with heavy vibrations.
In Stock
Order now and your part arrives by Mar 22
In Stock
Order now and your part arrives by Mar 22
$6.40
This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capsc...
In Stock
Order now and your part arrives by Mar 22
This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between conne...
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Dana from HAMMOND, IN
- Parts Used:
- 792006
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Read less
Was this instruction helpful to you?
Thank you for voting!