Models > 96046007700 > Instructions

96046007700 Poulan Lawn Tractor - Instructions

Jump to:

All Instructions for the 96046007700

Customer:: Trace from LISLE, IL
Parts Used:: 532138971
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins

Needed to replace the bent blades on my riding mower.

- Made the mower safe to work on the blades (remove spark plug wires, etc.)

- Raised the mower to get access to the blades, wedged a wood block against the blade.

- Used impact driver with socket to remove bolt holding blade.

- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest.

16 of 24 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Rene from COVINGTON, LA
Parts Used:: 691751, 690822
Difficulty Level:: Really Easy
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Socket set, Wrench set

Stopped running. Turned to be a bent intake push rod and broken rocker arm

Removed head. Replaced both rocker arms, intake pus rod, push rod guide exhaust and head gaskets. Torqued head in 3 stages to 216 in/lbs. gapped intake to .004 and exhaust to .006 at TDC

Added oil and gas. Now running great

If you need to replace push rods use steel (exhaust) they are the same length
The engine was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Gary from PILESGROVE, NJ
Parts Used:: 532123583
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Take the wheel off. Place the key in the slot. Put the wheel back on.

Just described it.

5 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Emanuel from FERRIDAY, LA
Parts Used:: 794683
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Socket set

Gas leaking from tube breather

First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mower with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.

8 of 24 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Russell from MACON, GA
Parts Used:: 582042802, 532193350
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Dryer runs no heat

Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.

1 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Frederick from BINGHAMTON, NY
Parts Used:: 532121749
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Front wheels, too much end play

Shimmed the wheels out on axle.. No more slop.

10 of 37 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the 96046007700