425600X8A Murray Lawn Tractor - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from HELENA, AL
- Parts Used:
- 1001200MA
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench (Adjustable), Wrench set
Hit a root with the mower blade which broke the shaft housing.
Remove old blade and blade adapter (important part).Removed nut that holds pulley to the shaft housing, then removed the pulley and put belt out of the way.Used 3/8 air impact to remove bolts that held housing in. Pre-greased th inner housing before installing.New housing mount holes were not threaded so had to get new bolts to fasten. Used 5/16 x 1-1/2" hex heads with lock washers, washers, and Teflon lock nuts. Once mounted, reinstalled the top pulley and belt, tightened top nut, and put on blade adapter at underside of housing. Now ready for new blade.
Was this instruction helpful to you?
Thank you for voting!