Models > 13AX935T004

13AX935T004 (2014) MTD Lawn Tractor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Bow Tie Cotter Pin – Part Number: 714-04040
$3.99
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: ...
In Stock
Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063
$3.99
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...
In Stock
Steering Pinion Gear – Part Number: 717-1554
$10.32
This part contains one steering pinion gear for a lawn tractor. It is part of the steering mechanism and is highly prone to wear and tear. If this pinion gear becomes stripped it can cause steering to...
In Stock
Lock Ball Joint Assembly – Part Number: 923-0448A
$24.65
This is a lock ball joint assembly for your lawn tractor. The ball joint assembly connects to the pitman arm and the drag link, and is a part of the steering mechanism on your machine. This part is 7/...
In Stock
Nut, Flange Lock, 3/8-16, Grf – Part Number: 712-04065
$3.99
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
Hex Flange Nut 5/8-18 Thd. – Part Number: 712-0417A
$7.10
This part includes one hex flange nut that is compatible with various outdoor equipment. It has a thread of 5/8-18 and consists of a hex nut with a wide flange on one end. The flange works like a wash...
In Stock
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
$4.99
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Self-Tapping Screw, 5/16-18, .750 – Part Number: 710-04484
$3.99
This is a self-tapping screw for your lawn equipment. It has multiple applications, and is made of durable metal. This part is sold individually. To install this screw, you will need a wrench. The maj...
In Stock
Nut, Flange Lock, 1/4-20, Grf – Part Number: 712-04064
$3.99
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...
In Stock
Knob, 3/8-16, .875 – Part Number: 720-04061
$5.11
In Stock
Ball Bearing – Part Number: 941-0919B
No Longer Available
Bell. Wash. .340 I.D. x .872 O.D. – Part Number: 736-0242
$4.99
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Replacing the Lock Ball Joint Assembly

Replacing the Lock Ball Joint Assembly

Replacing the Extension Spring,.62 X 6.12

Replacing the Extension Spring,.62 X 6.12

Replacing the Headlamp, 12V

Replacing the Headlamp, 12V

Replacing the Pulley, Flat Idler

Replacing the Pulley, Flat Idler

Replacing the Deck Adjustment Gear

Replacing the Deck Adjustment Gear

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
michael from eden, NC
Parts Used:
731-04949A
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Didn't line up very easy
Put one side in bottom first and you have to slightly twist the lens to get the other clips to pop in.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
LISA M from BATESVILLE, AR
Parts Used:
737-0300A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do es not make the slight howl sound.
Read less
5 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Randall from GALLIPOLIS, OH
Parts Used:
738-1186A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Blade got bend after hit a stump so had to buy new spindle shaft
The repair was a very easy.
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More