Models
>
13A4065-033
13A4065-033 (2004) MTD Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 13A4065-033
Viewing 8 of 8
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Mar 20
$9.76
This part includes one hex flange nut that is compatible with various outdoor equipment. It has a thread of 5/8-18 and consists of a hex nut with a wide flange on one end. The flange works like a wash...
In Stock
Order now and your part arrives by Mar 20
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Order now and your part arrives by Mar 20
This is a flange bearing for your lawn and garden equipment. It is a bearing contained inside a housing unit that provides a strong and secure position, while still allowing the bearing within to rota...
In Stock
Order now and your part arrives by Mar 20
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
Order now and your part arrives by Mar 20
$6.42
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...
In Stock
Order now and your part arrives by Mar 20
In Stock
Order now and your part arrives by Mar 20
Special Order
In Stock
Order now and your part arrives by Mar 20
In Stock
Order now and your part arrives by Mar 20
$6.25
This self tapping screw is an authentic replacement part provided by the manufacturer. It is compatible with over 150 types of Ryobi and MTD lawn tractors. This screw is used to secure pieces of the m...
In Stock
Order now and your part arrives by Mar 20
$6.25
This is an authentic OEM part. The hardened metal, flat washer is compatible with a variety of tiller and tractor machines. The washer is most often fitted between the screw plug and the deck assembly...
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- LISA M from BATESVILLE, AR
- Parts Used:
- 737-0300A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Was this instruction helpful to you?
Thank you for voting!