13A3761G077 (2005) MTD Lawn Tractor - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- michael from eden, NC
- Parts Used:
- 731-04949A
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
Didn't line up very easy
Put one side in bottom first and you have to slightly twist the lens to get the other clips to pop in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LISA M from BATESVILLE, AR
- Parts Used:
- 737-0300A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it does not make the slight howl sound.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from BAY VILLAGE, OH
- Parts Used:
- 747-04332A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Bent the old one on a stump
Removed one 1/2" bolt to remove old part .
Slipped new part in place. put bolt in open loop and tightened.
Slipped new part in place. put bolt in open loop and tightened.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Danny from MONROE, VA
- Parts Used:
- 747-04269A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench set
Could not get deck level with previous deck rod ordered
Removed old deck rod, installed correct new deck rod
Was this instruction helpful to you?
Thank you for voting!