Models
>
13A1760F077
13A1760F077 (2005) MTD Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 13A1760F077
Viewing 8 of 8
Keep searches simple, eg. "belt" or "pump".
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...
In Stock
$56.69
Genuine OEM replacement part, this item is sold individually.
As the description says, this is the Steering Shaft for all of the Lawn Tractors shown below.
One of the most popular reasons this part ...
In Stock
$60.61
This is an OEM deck engagement cable, sold as one part. This part is for a lawnmower and its purpose is to engage the mowers blade, allowing you to control your engine zone. It consists of a metal wir...
In Stock
This is a manufacturer-approved replacement flange bearing for a lawn tractor. It is sold individually. The function of this part is to help secure the axle assembly to the pivot axle. It also allows ...
In Stock
$24.65
This is a lock ball joint assembly for your lawn tractor. The ball joint assembly connects to the pitman arm and the drag link, and is a part of the steering mechanism on your machine. This part is 7/...
In Stock
In Stock
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
In Stock
This part includes one hex flange nut that is compatible with various outdoor equipment. It has a thread of 5/8-18 and consists of a hex nut with a wide flange on one end. The flange works like a wash...
In Stock
$4.99
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
$4.99
This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventua...
In Stock
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- LISA M from BATESVILLE, AR
- Parts Used:
- 737-0300A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GINO from MURRAY, KY
- Parts Used:
- 783-04602C-0637
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
light switch broken
Had to pull stove out of the way for easier replacement of the hood switch. Exact replacement part was simple to change.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from BAY VILLAGE, OH
- Parts Used:
- 747-04332A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Bent the old one on a stump
Removed one 1/2" bolt to remove old part .
Slipped new part in place. put bolt in open loop and tightened.
Slipped new part in place. put bolt in open loop and tightened.
Was this instruction helpful to you?
Thank you for voting!