Models
>
13AL79XT099
13AL79XT099 MTD Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 13AL79XT099
Viewing 9 of 9Keep searches simple, eg. "belt" or "pump".
$3.99
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: ...
In Stock
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...
In Stock
$24.65
This is a lock ball joint assembly for your lawn tractor. The ball joint assembly connects to the pitman arm and the drag link, and is a part of the steering mechanism on your machine. This part is 7/...
In Stock
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
$4.99
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
This is a self-tapping screw for your lawn equipment. It has multiple applications, and is made of durable metal. This part is sold individually. To install this screw, you will need a wrench. The maj...
In Stock
In Stock
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...
In Stock
In Stock
$4.99
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Laurie from RICHLANDS, NC
- Parts Used:
- 731-05628
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Socket set, Wrench (Adjustable), Wrench set
Oil Drain Sleeve
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carl from DECATUR, TX
- Parts Used:
- 756-05034A, 748-05029A, 712-04065
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
Seized bearing and spacer on bolt shaft for idler pulley
Unfortunately I couldn’t find the spacer on the Internet, so I ended up going to the hardware store and buying multiple sizes of spacers and bearings to complete the install. I ended up using a steel spacer with shoulder and two bearings. Way overkill, but worth the three dollars.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randall from GALLIPOLIS, OH
- Parts Used:
- 738-1186A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Blade got bend after hit a stump so had to buy new spindle shaft
The repair was a very easy.
Was this instruction helpful to you?
Thank you for voting!