Models
>
WE261
WE261 (2009-12) Husqvarna Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for WE261
Viewing 6 of 6_WW_1.gif "Page A Diagram and Parts List for 2009-12 Husqvarna Lawn Tractor")
_WW_2.gif "Page B Diagram and Parts List for 2009-12 Husqvarna Lawn Tractor")
_WW_3.gif "Page C Diagram and Parts List for 2009-12 Husqvarna Lawn Tractor")
_WW_4.gif "Page D Diagram and Parts List for 2009-12 Husqvarna Lawn Tractor")
_WW_5.gif "Page E Diagram and Parts List for 2009-12 Husqvarna Lawn Tractor")
_WW_6.gif "Page F Diagram and Parts List for 2009-12 Husqvarna Lawn Tractor")
Keep searches simple, eg. "belt" or "pump".
$3.99
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
In Stock
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to ...
In Stock
$8.71
This manufacturer-approved bolt and washer assembly is for lawn tractors.
Wear work gloves to protect your hands when installing this part.
In Stock
In Stock
$14.93
This ignition switch has been sourced directly from the original manufacturer and is sold individually (key sold separately). The ignition switch is also sometimes referred to as a starter switch and ...
In Stock
This is a 5/16-inch metal cotter pin and it is sold as an individual part. Cotter pins secure a variety of different assemblies by placing them through a drilled hole in a shaft or bolt, such as on a ...
In Stock
On Order
This part includes one genuinely sourced washer for a ride-on lawn mower. Washers help to disperse the load and provides a tight seal in between components. Depending on your unit, the applications wi...
In Stock
$4.99
This is a single OEM replacement screw for a lawn mower. This flanged hex head screw measures 1/4-20 by 5/8. It is used in various applications, so we recommend checking the diagram related to your mo...
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for WE261
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gary from PILESGROVE, NJ
- Parts Used:
- 532123583
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from OAKFIELD, ME
- Parts Used:
- 532430645
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Primary chain worn out
The primary chain was worn out
Got a new one took out one link and replaced it with a master link#35 then cut off the old primary chain and installed the new one
Only required jacking the machine up and no disassembly of the unit
Got a new one took out one link and replaced it with a master link#35 then cut off the old primary chain and installed the new one
Only required jacking the machine up and no disassembly of the unit
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frederick from BINGHAMTON, NY
- Parts Used:
- 532121749
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop.
Was this instruction helpful to you?
Thank you for voting!