Models > RZ4216CA

RZ4216CA ((966612402)(2011-02)) Husqvarna Lawn Tractor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for RZ4216CA

Viewing 10 of 10
Keep searches simple, eg. "belt" or "pump".
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
In Stock
This mandrel pulley is for lawn tractors. Mandrel pulley spins the blade on the mower deck of the tractor. Wear work gloves to protect your hands when installing this part.
In Stock
In Stock
Stripper Mandrel
In Stock
In Stock
$26.14
In Stock
In Stock
$27.40
In Stock
On Order
In Stock
$11.20
In Stock
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Steven from Hickory, NC
Parts Used:
532177968
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench set
Lound deck noise when mower put into motion
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
4 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!