Models > 917240443

917240443 Husqvarna Lawn Tractor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 917240443

Viewing 19 of 19
Alternator/wire harness/starter/ignition Diagram and Parts List for Husqvarna Lawn Tractor
Alternator/wire harness/starter/ignition
Blower housing/air cleaner Diagram and Parts List for Husqvarna Lawn Tractor
Blower housing/air cleaner
Carburetor/fuel supply Diagram and Parts List for Husqvarna Lawn Tractor
Carburetor/fuel supply
Chassis Diagram and Parts List for Husqvarna Lawn Tractor
Chassis
Cylinder head/intake manifold Diagram and Parts List for Husqvarna Lawn Tractor
Cylinder head/intake manifold
Cylinder/crankshaft/camshaft Diagram and Parts List for Husqvarna Lawn Tractor
Cylinder/crankshaft/camshaft
Decals Diagram and Parts List for Husqvarna Lawn Tractor
Decals
Drive Diagram and Parts List for Husqvarna Lawn Tractor
Drive
Electrical Diagram and Parts List for Husqvarna Lawn Tractor
Electrical
Engine Diagram and Parts List for Husqvarna Lawn Tractor
Engine
Engine sump/oil pump Diagram and Parts List for Husqvarna Lawn Tractor
Engine sump/oil pump
Flywheel/controls Diagram and Parts List for Husqvarna Lawn Tractor
Flywheel/controls
Gasket sets/carburetor overhaul kit Diagram and Parts List for Husqvarna Lawn Tractor
Gasket sets/carburetor overhaul kit
Mower deck Diagram and Parts List for Husqvarna Lawn Tractor
Mower deck
Mower lift Diagram and Parts List for Husqvarna Lawn Tractor
Mower lift
Seat Diagram and Parts List for Husqvarna Lawn Tractor
Seat
Steering Diagram and Parts List for Husqvarna Lawn Tractor
Steering
Transaxle-k46bt Diagram and Parts List for Husqvarna Lawn Tractor
Transaxle-k46bt
Wheels & tires Diagram and Parts List for Husqvarna Lawn Tractor
Wheels & tires
Keep searches simple, eg. "belt" or "pump".
Washer Head Screw – Part Number: 584953901
$6.84
This OEM hex head bolt is for lawn tractors. It is used on mower deck mandrels for mounting the spindles to the deck. This is a self-threading screw and will need to be replaced if it is worn or missi...
In Stock
Order now and your part arrives by May 14
Lawn Tractor Mandrel Assembly – Part Number: 587819701
$73.55
In Stock
Order now and your part arrives by May 14
Lawn Mower Ring Clip – Part Number: 812000029
$6.84
This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part...
In Stock
Order now and your part arrives by May 14
Shoulder Bolt – Part Number: 596434404
$6.84
This is a genuine Husqvarna replacement part sourced directly from original equipment manufacturer for use with lawn mowers/tractors. It is commonly used in riding mowers to keep the gauge wheel in pl...
In Stock
Order now and your part arrives by May 14
Lawn Mower Wheel – Part Number: 589527301
$13.56
This genuine Craftsman hex gauge wheel is a replacement part sourced directly from the original manufacturer and is designed for use with riding lawn mowers. It attaches to the mower’s deck assembly a...
In Stock
Order now and your part arrives by May 14
Cap Axle Black 1 50 x 1 00 – Part Number: 532104757
$6.84
This is an OEM axle cap for lawn tractors and is sold individually. It stops debris from getting into the wheel hub and axle. This axle cap is prone to wear and tear and should be replaced when it is ...
In Stock
Order now and your part arrives by May 14
Lawn Mower Washer – Part Number: 532121749
$6.84
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to ...
In Stock
Order now and your part arrives by May 14
Bolt and Washer Assembly – Part Number: 532193003
$13.67
This is an OEM bolt and washer assembly, designed to hold the lawnmower blade to the spindle shaft. This threaded bolt has a curved rounded head and measures approximately 7/16-inches by 2-inches. If ...
In Stock
Order now and your part arrives by May 14
Lawn Mower Flangelock Hex Nut – Part Number: 532409149
$6.84
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most mod...
In Stock
Order now and your part arrives by May 14
Lawn Mower Mandrel Spacer Washer – Part Number: 532187690
$7.52
This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are ...
In Stock
Order now and your part arrives by May 14
Lawn Mower Hardened Washer – Part Number: 532188967
$6.84
This is a Genuine Manufacturer Approved replacement washer used on lawn and garden equipment. This part is made out of Metal and is Sold Individually. Washer helps to distribute the pressure evenly ov...
In Stock
Order now and your part arrives by May 14
Mandrel Ball Bearing – Part Number: 532110485
$19.59
This is a single mandrel ball bearing for a mower. It is sold individually, however it is a good idea to have a couple of these on hand. This bearing is located on top of the shaft, which is part of t...
In Stock
Order now and your part arrives by May 14
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 917240443

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Replacing the Mandrel Ball Bearing

Replacing the Mandrel Ball Bearing

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Anthony from OLIVEHILL, TN
Parts Used:
812000029, 532104757
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read less
27 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
D from HUNTSVILLE, AL
Parts Used:
84001919
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
Engine quit due to valve guide sliding out causing rocker arm to be immovable resulting in bent push rods.
Clean engine with a Gunk type product. Remove valve cover. Loosen bolts and remove old cylinder head. One bolt is located inside valve cover area. Remove old gasket and inspect and clean that surface. Attach new head with new gasket using existing bolts. Torque to 18'#s with a cross type pattern. Attach new rocker arms and push rods. Set valve clearance to .004 - .006. Attach valve cover with gasket. Check oil level. Start and let it warm up. Let cool remove cover then check valve clearance again. Replace cover.
Read less
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from CANBY, MN
Parts Used:
587820301
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Socket set
Worn out Mandrel Assemblies
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More