Models
>
917990360
917990360 Craftsman Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 917990360
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
$6.51
This OEM hex head bolt is for lawn tractors. It is used on mower deck mandrels for mounting the spindles to the deck. This is a self-threading screw and will need to be replaced if it is worn or missi...
In Stock
Order now and your part arrives by Mar 30
Special Order
$13.02
This is an OEM bolt and washer assembly, designed to hold the lawnmower blade to the spindle shaft. This threaded bolt has a curved rounded head and measures approximately 7/16-inches by 2-inches. If ...
In Stock
Order now and your part arrives by Mar 30
$18.66
This authentic manufacturer-sourced mandrel pulley is designed for use with Craftsman lawn mowers. It serves as a direct replacement for a missing or damaged pulley originally installed on the unit, h...
In Stock
Order now and your part arrives by Mar 30
$70.05
This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction ...
In Stock
Order now and your part arrives by Mar 30
$30.03
This ignition switch has been sourced directly from the original manufacturer and is sold individually (key sold separately). The ignition switch is also sometimes referred to as a starter switch and ...
In Stock
Order now and your part arrives by Mar 30
$49.63
This replacement idler pulley is an original part sourced directly from the equipment manufacturer and is designed for use with select Poulan and Husqvarna riding lawn mowers and garden tractors. It p...
In Stock
Order now and your part arrives by Mar 30
This is a genuine OEM power take-off (PTO) switch for a ride-on lawn mower. This switch engages the electric clutch to spin the blades. This part includes one plastic PTO switch with a push-pull, snap...
In Stock
Order now and your part arrives by Mar 30
$32.64
This is a genuine replacement part sourced directly from the manufacturer. The engine pulley is commonly found in Craftsman lawn tractors and riding mowers. This part is made of metal, and is used i...
In Stock
Order now and your part arrives by Mar 30
$14.34
This steering shaft adapter kit is a genuine OEM replacement kit used in lawn tractors. It includes one splined adapter and one tapered adapter, used to connect the steering wheel to the steering shaf...
In Stock
Order now and your part arrives by Mar 30
$57.30
This is a genuine Husqvarna and Poulan part for use with Lawn Tractors. The steering shaft kit contains the parts needed to connect the steering wheel to the sector gear. The most common reason for re...
In Stock
Order now and your part arrives by Mar 30
$30.03
This genuine part is supplied directly from the original equipment manufacturer. The blade is designed for use with Husqvarna and Poulan riding lawn mowers and garden tractors. Mulching blades are des...
In Stock
Order now and your part arrives by Mar 30
Common Problems and Symptoms for 917990360
Viewing 2 of 2Will Not Start
Fixed by these parts
How to fix it
Deck blades will not turn
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Cynthia from COLUMBIA, NJ
- Parts Used:
- 547745901
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Socket set, Wrench set
Hanger bracket snapped off mower deck
Still not able to complete repair, unfortunately the box part was shipped in had a gaping hole in the bottom and some parts are missing. Trying to salvage from old mower deck.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from Hickory, NC
- Parts Used:
- 532177968
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set, Wrench set
Lound deck noise when mower put into motion
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c
... Read more
ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from GRAND JCT, CO
- Parts Used:
- 195270
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
fornt link came off and i ran it over and bent it.
it was easy to repair just put new one on and replaced the clips and it was finished, Great part and very good quality.
Was this instruction helpful to you?
Thank you for voting!