Models > 11A-A24T055

11A-A24T055 (2010) Yard Man Lawn Mower

Jump to:

Find Part by Name

Most Popular Parts for 11A-A24T055

Kit-service Replac

$33.70

This is a genuine OEM replacement kit. It includes the Blade Adapter,Bell Blade Support and the Hex Cap Screw that secures the blade to the Mower. When you use this kit, this is a good time to clean ...

Order now and your part arrives by Mar 22

Mulching Blade

★★★★★

(1)

$33.94

This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces alo...

Order now and your part arrives by Mar 22

CABLE-CONTROL 37.5

$20.80

This is an authentic 51-inch control cable for walk-behind lawn mowers. This part is made up of a metal wire cable with a Z-type bent end on either side, and a 37.5-inch rubberized outer cover. When t...

Bell Blade Support

$6.25

This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made o...

Order now and your part arrives by Mar 22

Side Chute

$25.92

This genuine manufacturer-sourced part is specially designed for use with Craftsman lawn mowers. It is mounted to the side of the mower to direct grass clippings. The chute provides an identical repla...

Nut-flglk

$6.25

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...

Order now and your part arrives by Mar 22

Grass Catcher Frame Assembly

★★★★★

(4)

$57.53

This is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman lawn mowers. The grass bag frame supports and hold the grass bag in place, while it is col...

Order now and your part arrives by Mar 22

Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)

$6.25

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...

Order now and your part arrives by Mar 22

Screw

$6.88

Wing knob screw 1/4-20 x 1

Order now and your part arrives by Mar 22

Lower Handle

$15.32

Order now and your part arrives by Mar 22

Hinge Pine

$6.25

This is a genuine OEM sourced replacement part is designed for use with walk behind/push lawn mowers. This hinge pin is an important part of a mechanism which allows users to secure the mulch door or ...

Order now and your part arrives by Mar 22

Spring-torsion

$11.10

This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with lawn mowers. It allows for the mulching door to retract. This torsion spring is made out of metal...

Order now and your part arrives by Mar 22

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 11A-A24T055

Viewing 1 of 1

Mower blade does not cut

Fixed by these parts

How to fix it

Videos for 11A-A24T055

Viewing 8 of 11

Replacing the Mulching Blade

Replacing the Control Cable, 37.58", 148Cc Engine

Replacing the CABLE-CONTROL 37.5

Replacing the Bell Blade Support

Replacing the Grass Catcher Frame Assembly

Replacing the Lawn Mower Trail Shield

Replacing the Hinge Pine

Installation Instructions for 11A-A24T055 Provided by Fix customers like you

Viewing 3 of 4

Customer:: glenn from LA CRESCENT, MN
Parts Used:: 753-06703
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Socket set

rear axel assembly needed replacement due to broken wheel height lever

Removed rear wheels, cut the old axel of with a sawsall and pulled the assembly out as I didn't want chance breaking the plastic retaining tabs as they can become brittle from age. Break the tabs and you have nothing to hold the new axel assembly in place.
Snapped the new assembly in place and put the wheels back on.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: David from ARLINGTON, TX
Parts Used:: 753-08680
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set

Front axle cover broke

Removed old part and installed new part. Perfect fit.

2 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Paul from NIXA, MO
Parts Used:: 720-05066A
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours

Lost wing knob and nut that holds the handle onto the mower

Can't do the repair. You sent me the two wing knobs I ordered, but no nuts. No one sells the nuts. I've driven all over trying to find them. Wasted my money and a lot of time. Zip ties are holding the handle on. I sent an email to customer service asking for the nuts, never heard a word from anyone. Another great example of how no ... Read more

Read less

2 of 10 people found this instruction helpful.

Was this instruction helpful to you?