Models
>
12AV566F211
12AV566F211 (2007) Troy-Bilt Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 12AV566F211
Viewing 3 of 3_WW_1.gif "Page A Diagram and Parts List for 2007 Troy-Bilt Lawn Mower")
_WW_2.gif "Page B Diagram and Parts List for 2007 Troy-Bilt Lawn Mower")
_WW_3.gif "Page C Diagram and Parts List for 2007 Troy-Bilt Lawn Mower")
Keep searches simple, eg. "belt" or "pump".
$33.94
This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces alo...
In Stock
Order now and your part arrives by Mar 21
This Genuine OEM control cable is designed to connect the control handle to the engine mechanism on compatible lawn mowers, enabling safe and responsive blade engagement. When the control handle is pr...
On Order
$6.25
This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made o...
In Stock
Order now and your part arrives by Mar 21
$20.67
This is an authentic OEM part for use with Craftsman Lawn Mowers. The bail control bar lets you start the engine when you pull the bail control bar against the handle and stops the engine when you rel...
In Stock
Order now and your part arrives by Mar 21
$24.46
This is an authentic replacement part sourced directly from the manufacturer. The mower cable is commonly found in Craftsman lawn mowers. This is a metal cable with a flexible plastic casing, and it...
Special Order
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
Order now and your part arrives by Mar 21
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Order now and your part arrives by Mar 21
Genuine OEM replacement part, this item is sold individually. The Blade Control Cable is the cable that stops the blade when the control handle is released on Walk-Behind Mowers. This part has Z bend ...
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
$6.32
This is a Genuine Manufacturer Approved replacement part used on a variety of Lawn and Garden Equipment. This screw has different applications depending on your equipment. This item is made out of Met...
In Stock
Order now and your part arrives by Mar 21
$29.56
Genuine OEM replacement part used on Push Walk-Behind Mowers. This part is made out of Plastic and it is sold individually. It is mounted to the side of the mower for the cut grass to be expelled out of it.
In Stock
Order now and your part arrives by Mar 21
$6.25
This is a genuine OEM sourced replacement part is designed for use with walk behind/push lawn mowers. This hinge pin is an important part of a mechanism which allows users to secure the mulch door or ...
In Stock
Order now and your part arrives by Mar 21
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 12AV566F211
Viewing 2 of 2Mower blade does not cut
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Charles from MIDVALE, OH
- Parts Used:
- 946-1132, 747-1161A-0637
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Cable was frozen and bail was broken
I removed the bail and removed cable from motor! Then it was ready for new parts installation!
I attached the cable to the motor and I put the right side of bail in its hole and I then installed cable into the bail and then installed the left side of bail into its hole!! Once that was completed I used two zip ties to cinch down cab ... Read more le to the handle!! Job done!
I attached the cable to the motor and I put the right side of bail in its hole and I then installed cable into the bail and then installed the left side of bail into its hole!! Once that was completed I used two zip ties to cinch down cab ... Read more le to the handle!! Job done!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jay from GERRY, NY
- Parts Used:
- 734-04018C
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from WAYNE, MI
- Parts Used:
- 734-04018C
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Front drive wheels were wore out
Unbolted old wheels and bolted new wheels to my lawn mower
Was this instruction helpful to you?
Thank you for voting!