Models > 12AJ836G211

12AJ836G211 (2008) Troy-Bilt Lawn Mower

Jump to:

Find Part by Name

Diagrams for 12AJ836G211

Viewing 4 of 4

Most Popular Parts for 12AJ836G211

Viewing 12 of 115

Kit-service Replac

$35.09

This is a genuine OEM replacement kit. It includes the Blade Adapter,Bell Blade Support and the Hex Cap Screw that secures the blade to the Mower. When you use this kit, this is a good time to clean ...

Order now and your part arrives by May 10

Mulching Blade

★★★★★

(1)

$35.34

This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces alo...

Order now and your part arrives by May 10

Nut-flglk 5/16-18

$6.51

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...

Order now and your part arrives by May 10

Bell Blade Support

$6.51

This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made o...

Order now and your part arrives by May 10

Lawn Mower Flanged Lock Nut

$6.51

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...

Order now and your part arrives by May 10

Lawn Mower Hex Washer Head Screw

$6.51

This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...

Order now and your part arrives by May 10

Nut-flglk

$6.51

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...

Order now and your part arrives by May 10

BEARING:FLG:HEX

$7.31

This is a an authentic OEM approved replacement hex flange bearing designed for use with walk behind mowers. This part helps to secure the front axle shaft to the deck. This flange bearing is made out of plastic.

KIT- WHL IDLE 8 X

$67.61

8 x 2.125 This wheel is for lawn mowers. Wear work gloves to protect your hands when installing this part.

Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)

$6.51

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...

Order now and your part arrives by May 10

KIT-WHEEL DR 8 X 2

$64.97

This is a genuine Troy-Bilt replacement wheel kit specially designed for walk-behind lawn mowers. This is the wheel that supports and helps to move your mower around. This wheel assembly consists of a...

Side Discharge Deflector

$30.78

Genuine OEM replacement part used on Push Walk-Behind Mowers. This part is made out of Plastic and it is sold individually. It is mounted to the side of the mower for the cut grass to be expelled out of it.

Order now and your part arrives by May 10

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Paul

March 4, 2023

Hi variable speed cable came off after replacing drive belt under the mower deck where does it attach too on the lower pulley assembly Thank you

For model number 12AJ836G211

Hello Paul, thank you for contacting us. Based on our research, the speed control cable is placed in a tab near the lower pulley assembly. We hope this helps!

Was this helpful?

Common Problems and Symptoms for 12AJ836G211

Viewing 1 of 1

Mower blade does not cut

Fixed by these parts

How to fix it

Videos for 12AJ836G211

Viewing 8 of 6

Replacing the Mulching Blade

Replacing the Bell Blade Support

Replacing the Hinge Pine

Replacing the Pin-Hinge

Replacing the Kit-service Replac

Replacing the Spring-torsion

Replacing the Lawn Mower Torsion Spring

Installation Instructions for 12AJ836G211 Provided by Fix customers like you

Viewing 1 of 2

Customer:: Phil from SAINT CHARLES, MO
Parts Used:: 741-04136B
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers

wheels falling down

lift mower up on angle, sip beer. took the cotter pin out of both sides. Finished beer. try to figure out how they go on, opened another beer. Figured it out, put cotter pin back on lowered the mower, drank on the new beer. Wheels adjusted just fine.. Thanks...

7 of 17 people found this instruction helpful.

Was this instruction helpful to you?