Models > 12A-264U011

12A-264U011 (2009) Troy-Bilt Lawn Mower

Jump to:

Find Part by Name

Diagrams for 12A-264U011

Viewing 3 of 3

Page A

Page B

Page C

Most Popular Parts for 12A-264U011

Viewing 12 of 68

WHEEL-GEAR 8-INCH INTE

★★★★★

(2)

$30.64

This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear on the inside whic...

Bell Blade Support

$6.51

This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made o...

Order now and your part arrives by Jun 5

Lawn Mower Control Handle

$21.52

This is an authentic OEM part for use with Craftsman Lawn Mowers. The bail control bar lets you start the engine when you pull the bail control bar against the handle and stops the engine when you rel...

Order now and your part arrives by Jun 5

Lawn Mower Flanged Lock Nut

$6.51

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...

Order now and your part arrives by Jun 5

Lawn Mower Hex Washer Head Screw

$6.51

This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...

Order now and your part arrives by Jun 5

KIT- WHL IDLE 8 X

$67.61

8 x 2.125 This wheel is for lawn mowers. Wear work gloves to protect your hands when installing this part.

Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)

$6.51

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...

Order now and your part arrives by Jun 5

Hinge Pine

$6.51

This is a genuine OEM sourced replacement part is designed for use with walk behind/push lawn mowers. This hinge pin is an important part of a mechanism which allows users to secure the mulch door or ...

Order now and your part arrives by Jun 5

Spring-torsion

$11.56

This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with lawn mowers. It allows for the mulching door to retract. This torsion spring is made out of metal...

Order now and your part arrives by Jun 5

Cable

$28.17

This control cable is specially designed for use with walk-behind lawn mowers. It is supplied by the original equipment manufacturer. The cable is utilized to engage the blade. This part is connected ...

Order now and your part arrives by Jun 5

Snow Blower Star Knob

$11.07

This star knob specifically fits a variety of lawn mowers and is used to secure both the lower and upper handles of your lawn mower. If your knob is worn out or loose, then replacing it will solve you...

Order now and your part arrives by Jun 5

Pin Dowel

$6.51

This is an authentic item that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. It provides an identical replacement for a missing or a faulty dowel pin that wa...

Order now and your part arrives by Jun 5

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Miles

May 5, 2022

The oil leaks for the button not from the deck.

For model number 12A-264U011

Hi Miles, Thank you for your question. Before we can provide you with information on the button, we will need the model number from the engine. The model number may be found near the air filter, the spark plug, or the muffler. If you could resubmit your question with this information, we would be happy to help you. We are open 7 days a week. We look forward to hearing from you!

Was this helpful?

Videos for 12A-264U011

Viewing 8 of 4

Replacing the Bell Blade Support

Replacing the Hinge Pine

Replacing the Pin-Hinge

Replacing the Spring-torsion

Replacing the Lawn Mower Torsion Spring

Replacing the Rope-guide Eyebolt

Replacing the Rope Guide

Installation Instructions for 12A-264U011 Provided by Fix customers like you

Viewing 3 of 4

Customer:: Jay from GERRY, NY
Parts Used:: 734-04018C
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins

Not the exact fit

I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: MICHAEL from Kennewick, WA
Parts Used:: 734-04018C
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

The treads on the front drive wheels were worn down to the point that they provided little traction.

Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ronald from WAYNE, MI
Parts Used:: 734-04018C
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

Front drive wheels were wore out

Unbolted old wheels and bolted new wheels to my lawn mower

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?