Models > 12A-466A711

12A-466A711 (2003) Troy-Bilt Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 12A-466A711

Viewing 1 of 1
Lawnmower Diagram and Parts List for 2003 Troy-Bilt Lawn Mower
Lawnmower
Keep searches simple, eg. "belt" or "pump".
WHEEL-GEAR 8-INCH INTE – Part Number: 734-04018C
$30.64
This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear on the inside whic...
On Order
Mulching Blade – Part Number: 942-0741A
$35.34
This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces alo...
In Stock
Order now and your part arrives by Jun 4
KIT- WHL IDLE 8 X – Part Number: 753-08091
$67.61
8 x 2.125 This wheel is for lawn mowers. Wear work gloves to protect your hands when installing this part.
Special Order
Hinge Pine – Part Number: 747-0710A
$6.51
This is a genuine OEM sourced replacement part is designed for use with walk behind/push lawn mowers. This hinge pin is an important part of a mechanism which allows users to secure the mulch door or ...
In Stock
Order now and your part arrives by Jun 4
Frame-Grassbag 21In. – Part Number: 747-04080A
$79.56
Special Order
Nut-Wing 1/4-20 – Part Number: 712-0397A
This is an authentic OEM supplied replacement part that is specially designed for use with walk-behind lawn mowers. In conjunction with a bolt which is sold separately, this part is generally used to ...
No Longer Available
Rear Trail Shield – Part Number: 731-04998
This is a genuine item that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. It is an identical replacement for a missing or damaged rear trail shield that was ...
No Longer Available
Lawn Mower Hinged Mulching Plug – Part Number: 987-02055
$40.07
In Stock
Order now and your part arrives by Jun 4
Wave Wash. 1-In. I.D. X 1.5-In. – Part Number: 736-0447
$6.51
This is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from MTD, Ryobi, and Troy-Bilt. The metal wave washer is used to provide cushioning b...
In Stock
Order now and your part arrives by Jun 4
Snap Ring 1.0 Dia – Part Number: 716-0102
$8.02
In Stock
Order now and your part arrives by Jun 4
Front Baffle – Part Number: 782P5002B
This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The front baffle is commonly used to protect the leading edge of the mower\\\'s deck. Thi...
No Longer Available
Kit-service:trans – Part Number: 753-05465
$280.77
This is an authentic replacement part sourced directly from the manufacturer. The transmission assembly is commonly found in lawn mowers from MTD, Ryobi, Troy-Bilt, Bolens, Yard Man, and Yard Machine...
In Stock
Order now and your part arrives by Jun 4
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 12A-466A711

Viewing 1 of 1
Mower blade does not cut
Fixed by these parts
Fixing
How to fix it
Replacing the Mulching Blade

Replacing the Mulching Blade

Replacing the Hinge Pine

Replacing the Hinge Pine

Replacing the Pin-Hinge

Replacing the Pin-Hinge

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jay from GERRY, NY
Parts Used:
734-04018C
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MICHAEL from Kennewick, WA
Parts Used:
734-04018C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
The treads on the front drive wheels were worn down to the point that they provided little traction.
Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ronald from WAYNE, MI
Parts Used:
734-04018C
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Front drive wheels were wore out
Unbolted old wheels and bolted new wheels to my lawn mower
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More