Models > 565

565 Troy-Bilt Lawn Mower

Jump to:

Find Part by Name

Diagrams for 565

Viewing 2 of 2

Deck/Drive Control/Grass Catcher

Wheel Assembly

Most Popular Parts for 565

Viewing 12 of 114

WHEEL-GEAR 8-INCH INTE

★★★★★

(2)

$25.36

This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear on the inside whic...

Mulching Blade

★★★★★

(1)

$35.34

This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces alo...

Order now and your part arrives by Jul 16

Lawn Mower Drive Belt

$18.54

This walk-behind mower drive belt transfers power from the engine pulley to the transmission, allowing the self-propelled front wheels to move the mower forward. Replacing a worn or stretched belt hel...

Order now and your part arrives by Jul 16

BEARING:FLG:HEX

$6.75

This is a an authentic OEM approved replacement hex flange bearing designed for use with walk behind mowers. This part helps to secure the front axle shaft to the deck. This flange bearing is made out of plastic.

Hinge Pine

$6.51

This is a genuine OEM sourced replacement part is designed for use with walk behind/push lawn mowers. This hinge pin is an important part of a mechanism which allows users to secure the mulch door or ...

Order now and your part arrives by Jul 16

WHEEL-REAR 12X2.1

$96.39

This replacement rear wheel is an authentic OEM sourced item that is specially designed for walk-behind lawn mowers. This is the rear wheel that supports the unit, please note that the front drive whe...

Frame-Grassbag 21In.

$81.86

Nut-Wing 1/4-20

This is an authentic OEM supplied replacement part that is specially designed for use with walk-behind lawn mowers. In conjunction with a bolt which is sold separately, this part is generally used to ...

Screw, 1/4-20 x .390

$7.42

Rear Trail Shield

This is a genuine item that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. It is an identical replacement for a missing or damaged rear trail shield that was ...

Lawn Mower Hinged Mulching Plug

$36.48

Order now and your part arrives by Jul 16

Spring Lever: Rear Wheel

$7.96

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 565

Viewing 1 of 1

Mower blade does not cut

Fixed by these parts

How to fix it

Videos for 565

Viewing 3 of 4

Replacing the Mulching Blade

Replacing the Hinge Pine

Replacing the Pin-Hinge

Installation Instructions for 565 Provided by Fix customers like you

Viewing 3 of 4

Customer:: Phil from SAINT CHARLES, MO
Parts Used:: 741-04136B
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers

wheels falling down

lift mower up on angle, sip beer. took the cotter pin out of both sides. Finished beer. try to figure out how they go on, opened another beer. Figured it out, put cotter pin back on lowered the mower, drank on the new beer. Wheels adjusted just fine.. Thanks...

7 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jay from GERRY, NY
Parts Used:: 734-04018C
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins

Not the exact fit

I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: MICHAEL from Kennewick, WA
Parts Used:: 734-04018C
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

The treads on the front drive wheels were worn down to the point that they provided little traction.

Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?