Models > 20637

20637 (290000001-290999999 - 2009) Toro Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 20637

Viewing 19 of 19
Keep searches simple, eg. "belt" or "pump".
This authentic component is an OEM part which is designed for use with Toro snowthrowers. It helps to secure a part on a shaft. This is an identical replacement for a damaged or a faulty hardware that...
In Stock
Order now and your part arrives by Nov 19
This is an Original Manufacturer Sourced Stepped Washer used on a variety of Push Lawn Mowers. This is the Metal Washer that fits with Rear or Front Wheel Cover depending on the model. It helps secure...
In Stock
Order now and your part arrives by Nov 19
Genuine Manufacturer Approved replacement part designed for use with some Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. Bolt is 3/8-16 X 3-5/8. It is commonly ...
In Stock
Order now and your part arrives by Nov 19
This item has been OEM sourced an is intended to be used with walk-behind lawnmowers from Toro and Lawn Boy. The metal pinion gear attaches the mower\\\'s transaxle and is used to interconnect with th...
In Stock
Order now and your part arrives by Nov 19
This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which i...
In Stock
Order now and your part arrives by Nov 19
This item is an authentic Toro part that has been sourced from the original manufacturer to be used with lawnmowers from Toro. The hard plastic cable anchor attaches to the side rail of the handle. Th...
In Stock
Order now and your part arrives by Nov 19
$21.95
This replacement v-belt is a genuine OEM approved part that is designed for use with Toro lawn mowers. It is the main belt that rotates the mower blade. Make sure to clean pulleys before installing th...
In Stock
Order now and your part arrives by Nov 19
It is a genuine manufacturer approved replacement part is designed for use with Toro walk-behind lawn mowers. This blade support works as an adapter helping to secure the mower blade. It is made from ...
In Stock
Order now and your part arrives by Nov 19
The metal blade driver assembly attaches to the blade with the guide belt wrapped around it. The spacer will go inside the driver. This part is used in lawn mowers. If the lawn mower wheels will not t...
In Stock
Order now and your part arrives by Nov 19
This is a filter cartridge for the air filter in various lawn equipment. The filter removes dirt, dust, and other debris from entering the carburetor, and contaminating the engine. If the engine in yo...
In Stock
Order now and your part arrives by Nov 19
This is a genuine manufacturer-sourced component which is specially designed for use with Toro walk-behind lawn mowers. It is the lever that helps to secure the tractions control bar, please make sure...
In Stock
Order now and your part arrives by Nov 19
This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resisto...
In Stock
Order now and your part arrives by Nov 19

Common Problems and Symptoms for 20637

Viewing 3 of 3
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Cannot pull starter cord out or engine will not turn over
Fixed by these parts
Fixing Fixing
How to fix it
Engine will not idle
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Seikai from MARICOPA, CA
Parts Used:
497680
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel , pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
15 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dustin from BANGOR, ME
Parts Used:
590508
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Socket set, Wrench set
Leaking gaskets
All the gaskets needed to be replaced on the Briggs 6.75 flathead I was rebuilding. I ported and polished the ports and shaved the eyebrow between the valves and the piston. The gasket set was a perfect fit. It is a monster now. It doesn't sound like a lawnmower engine anymore
4 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
randy from HIGHLAND, IL
Parts Used:
106-3999, 106-3987
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
The hub that the mower blade mounts to was broken
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
8 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!