Models
>
20480
20480 (7900001-7999999 - 1997) Toro Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 20480
Viewing 15 of 15(1997)_WW_1.gif "Engine Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_11.gif "Gear Case Assembly Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_12.gif "Handle Assembly Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_13.gif "Housing Assembly Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_2.gif "Page B Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_3.gif "Page C Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_4.gif "Page D Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_5.gif "Page E Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_6.gif "Page F Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_7.gif "Page G Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_8.gif "Page H Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_9.gif "Page I Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_10.gif "Page J Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_14.gif "Rear Axle Assembly Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
(1997)_WW_15.gif "Wiring Schematic Diagram and Parts List for 7900001-7999999 - 1997 Toro Lawn Mower")
Keep searches simple, eg. "belt" or "pump".
$6.25
This authentic component is an OEM part which is designed for use with Toro snowthrowers. It helps to secure a part on a shaft. This is an identical replacement for a damaged or a faulty hardware that...
In Stock
Order now and your part arrives by Mar 26
$6.25
Genuine OEM sourced part used on variety of Toro Lawn and Garden Equipment. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square ...
In Stock
Order now and your part arrives by Mar 26
$20.98
This is a Genuine Manufacturer Approved replacement part used on Toro Snowthrowers. This Ball Bearing has multiple applications in the Snowthrowers. This part is made out of Metal and it is Sold Indiv...
In Stock
Order now and your part arrives by Mar 26
$7.92
This replacement ignition key is sourced directly from original equipment manufacturer. It is specially designed for Toro snow blowers/throwers. This is a safety feature to prevent any unauthorized us...
In Stock
Order now and your part arrives by Mar 26
$6.25
This is an authentic manufacturer sourced replacement part designed for use with Toro walk-behind lawn mowers. This part helps to secure the mower wheel, allowing it to rotate freely. It is made out o...
In Stock
Order now and your part arrives by Mar 26
$6.25
It is an authentic Toro hardware. The thrust washer is supplied from the original equipment manufacturer for use on lawn mowers. It is utilized to provide a tight fit between connected components of t...
In Stock
Order now and your part arrives by Mar 26
$6.25
This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it bec...
In Stock
Order now and your part arrives by Mar 26
$6.25
It is an authentic Toro hardware. The washer-clutch is supplied from the original equipment manufacturer for use on lawn mowers. It helps to engage the pinion gear which is an important component that...
Special Order
$6.25
This friction ring is an authentic item which is supplied by the original manufacturer for Toro lawn mowers. It is one of the special parts that helps to provide a tight seal between components. Over ...
Special Order
$6.25
This item is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal washer is used to provide spacing between the whe...
In Stock
Order now and your part arrives by Mar 26
$6.57
This replacement cap-fuel is a genuine OEM supplied item, not an aftermarket imitation. It is a high quality part commonly used on Murray and Toro snow throwers and lawn mowers. It is used to keep the...
In Stock
Order now and your part arrives by Mar 26
$16.47
The metal pinion is an authentic Toro part that has been sourced from the original manufacturer to be used with lawnmowers. This item attaches to the transmission axle and interconnects with the drive...
In Stock
Order now and your part arrives by Mar 26
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 20480
Viewing 3 of 3Will Not Start
Fixed by these parts
How to fix it
Cannot pull starter cord out or engine will not turn over
Fixed by these parts
How to fix it
Engine will not idle
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Seikai from MARICOPA, CA
- Parts Used:
- 497680
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel
... Read more
, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michelle from AYLETT, VA
- Parts Used:
- 63-8360
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dustin from BANGOR, ME
- Parts Used:
- 590508
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Socket set, Wrench set
Leaking gaskets
All the gaskets needed to be replaced on the Briggs 6.75 flathead I was rebuilding. I ported and polished the ports and shaved the eyebrow between the valves and the piston. The gasket set was a perfect fit. It is a monster now. It doesn't sound like a lawnmower engine anymore
Was this instruction helpful to you?
Thank you for voting!