Models
>
20322
20322 (2000001-2999999 - 1992) Toro Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 20322
Viewing 18 of 18Keep searches simple, eg. "belt" or "pump".
$4.99
This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resisto...
In Stock
$17.96
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of r...
In Stock
In Stock
In Stock
In Stock
$3.99
This is a lock nut and it is used in a variety of outdoor lawn equipment. This lock nut has a nylon insert, making it a nyloc nut. The insert allows the nut to be resistant to turning caused by strong vibrations.
In Stock
In Stock
In Stock
$3.99
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It ...
In Stock
On Order
$6.39
This part is the replacement gasket for the crankcase on your engine. The gasket helps to create a seal on the crankcase and prevent leaks. If you notice that your engine is not running at peak perfor...
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stella
July 6, 2023
How do you change the drive belt
For model number 20322
Hi Stella, thank you for reaching out. We would suggest following these general instructions for replacing the drive belt, part number FIX9055659: Tilt the mower on one side and remove the old oil. Remove the screw off the belt cover assembly. The belt cover will come off. Next, remove the blade screw and pull the blade retainer to take the blade off. Remove the plastic guard to get access to the other pulley to which the belt is attached. Take the old belt off and align the new one with the pulley. Attach the plastic guard back by inserting the side screw back in. Attach the other side of the belt to the belt retainer and put the belt cover back on. Then, attach the blade by tightening the blade screw. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Common Problems and Symptoms for 20322
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replaced gasket that go's between the air cleaner housing and carb. cleaned housing and reinstalled with new air filter
Also replaced fuel tank , the built in fuel shut off started leaking , had to replace the tank. Ordered a new one Briggs & Stratton original equipment fit perfect . This is a 25 year old Briggs & Stratton lawn mower 3.5 HP, Runs perfect, starts by the 2nd crank every time. First time I ever had to spend money on it since I bought it new i
... Read more
n 1991
Read less
Was this instruction helpful to you?
Thank you for voting!
Smelled Gas Leaks
Inspected/removed fuel lines and found signs of leak. Removed and inspected carburetor and found that seals and gaskets were toast. Replaced said seals with ones from the kit that fit and replaced fuel lines.
Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together ... Read more with all the necessary clamps.
Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together ... Read more with all the necessary clamps.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michelle from AYLETT, VA
- Parts Used:
- 63-8360
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Was this instruction helpful to you?
Thank you for voting!