Models > 20054

20054 (270000001-270999999 - 2007) Toro Lawn Mower

Jump to:

Find Part by Name

Diagrams for 20054

Viewing 18 of 18

Air Cleaner Assembly

Blower Housing Assembly

Carburetor Assembly

Carburetor Overhaul Kit

Height-of-Cut Assembly

Housing Assembly

Muffler and Fuel Tank Assembly

Page O

Starter Assembly

Transmission Assembly

Most Popular Parts for 20054

Viewing 12 of 260

Retaining Ring

$6.25

This authentic component is an OEM part which is designed for use with Toro snowthrowers. It helps to secure a part on a shaft. This is an identical replacement for a damaged or a faulty hardware that...

Order now and your part arrives by Mar 19

Screw-handle

$6.25

Genuine OEM sourced part used on variety of Toro Lawn and Garden Equipment. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square ...

Order now and your part arrives by Mar 19

Bearing-ball

$20.98

This is a Genuine Manufacturer Approved replacement part used on Toro Snowthrowers. This Ball Bearing has multiple applications in the Snowthrowers. This part is made out of Metal and it is Sold Indiv...

Order now and your part arrives by Mar 19

Cable Guide

$6.25

This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the contro...

Order now and your part arrives by Mar 19

Bolt-blade

$6.25

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which i...

Order now and your part arrives by Mar 19

Bushing

$6.25

This is an authentic manufacturer sourced replacement part designed for use with Toro walk-behind lawn mowers. This part helps to secure the mower wheel, allowing it to rotate freely. It is made out o...

Order now and your part arrives by Mar 19

Thrust Washer

$6.25

It is an authentic Toro hardware. The thrust washer is supplied from the original equipment manufacturer for use on lawn mowers. It is utilized to provide a tight fit between connected components of t...

Order now and your part arrives by Mar 19

Washer-flat

$6.25

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it bec...

Order now and your part arrives by Mar 19

Knob Lever

$6.25

This item is a genuine Toro replacement part that is OEM sourced to ensure quality. The plastic knob is intended to be used with walk-behind lawnmowers. This item attaches to the height adjustment lev...

Order now and your part arrives by Mar 19

Clutch Washer

$6.25

It is an authentic Toro hardware. The washer-clutch is supplied from the original equipment manufacturer for use on lawn mowers. It helps to engage the pinion gear which is an important component that...

Spring-torsion

$14.97

This item is a genuine Toro replacement part that has been OEM sourced and is intended to be used with walk-behind lawnmowers. The metal spring is used to keep the side discharge chute in the down pos...

Order now and your part arrives by Mar 19

Knob-handle

$6.25

This item is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from Toro and Lawn Boy. The handle locking knob is used with a bolt to secure th...

Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 20054

Viewing 2 of 2

Will Not Start

Fixed by these parts

Videos for 20054

Viewing 1 of 1

Replacing the Blade-Recycling

Installation Instructions for 20054 Provided by Fix customers like you

Viewing 3 of 3

Customer:: Dustin from BANGOR, ME
Parts Used:: 590508
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Socket set, Wrench set

Leaking gaskets

All the gaskets needed to be replaced on the Briggs 6.75 flathead I was rebuilding. I ported and polished the ports and shaved the eyebrow between the valves and the piston. The gasket set was a perfect fit. It is a monster now. It doesn't sound like a lawnmower engine anymore

4 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: randy from HIGHLAND, IL
Parts Used:: 106-3999, 106-3987
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Wrench set

The hub that the mower blade mounts to was broken

The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up

8 of 24 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Henry from ORLAND PARK, IL
Parts Used:: 121-9118
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

Torsion spring broken

I pryed the apart the torsion spring lever from the handle with a large screw driver. It wasn't easy putting it back, but it worked

3 of 11 people found this instruction helpful.

Was this instruction helpful to you?