Models
>
21563
21563 (411000000 - 412146708) Toro Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 21563
Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
$6.51
This is an Original Manufacturer Sourced Stepped Washer used on a variety of Push Lawn Mowers. This is the Metal Washer that fits with Rear or Front Wheel Cover depending on the model. It helps secure...
In Stock
Order now and your part arrives by Apr 9
$21.85
This is a Genuine Manufacturer Approved replacement part used on Toro Snowthrowers. This Ball Bearing has multiple applications in the Snowthrowers. This part is made out of Metal and it is Sold Indiv...
In Stock
Order now and your part arrives by Apr 9
In Stock
Order now and your part arrives by Apr 9
$6.51
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It ...
In Stock
Order now and your part arrives by Apr 9
$7.47
This item has been OEM sourced an is intended to be used with walk-behind lawnmowers from Toro and Lawn Boy. The metal pinion gear attaches the mower\\\'s transaxle and is used to interconnect with th...
In Stock
Order now and your part arrives by Apr 9
$6.51
This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the contro...
In Stock
Order now and your part arrives by Apr 9
$29.66
It is an authentic part that is supplied by the original manufacturer. The assembly is utilized on Lawn Boy and Toro lawn mowers. The switch provides a user with an ability to turn off the engine. Ove...
In Stock
Order now and your part arrives by Apr 9
$27.83
This is a genuine recycling blade. It is sourced directly from original manufacturer for use with Toro lawn mowers. Please note, this blade is not a mulching blade. This place is designed to cut and q...
In Stock
Order now and your part arrives by Apr 9
$6.51
This item is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from Toro and Lawn Boy. The handle locking knob is used with a bolt to secure th...
In Stock
Order now and your part arrives by Apr 9
$6.51
This is the height adjustment know that is secured to the metal arm that allows user to adjust the cutting height of the mower. It is a high quality replacement part that is specially manufactured for...
In Stock
Order now and your part arrives by Apr 9
$15.60
It is a genuine manufacturer approved replacement part is designed for use with Toro walk-behind lawn mowers. This blade support works as an adapter helping to secure the mower blade. It is made from ...
In Stock
Order now and your part arrives by Apr 9
$6.51
This authentic item is supplied directly from the original equipment manufacturer for use with Toro and Lawn Boy lawn and garden equipment. It is an identical replacement for a missing or a faulty bus...
In Stock
Order now and your part arrives by Apr 9
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ray from YARDLEY, PA
- Parts Used:
- 105-1809
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set, Wrench set
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Was this instruction helpful to you?
Thank you for voting!