Models
>
20469
20469 (7900001 - 7999999) Toro Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 20469
Viewing 12 of 12
Keep searches simple, eg. "belt" or "pump".
$6.51
Genuine OEM sourced part used on variety of Toro Lawn and Garden Equipment. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square ...
In Stock
Order now and your part arrives by Mar 30
$6.51
This is an authentic manufacturer sourced replacement part designed for use with Toro walk-behind lawn mowers. This part helps to secure the mower wheel, allowing it to rotate freely. It is made out o...
In Stock
Order now and your part arrives by Mar 30
$27.83
This is a genuine recycling blade. It is sourced directly from original manufacturer for use with Toro lawn mowers. Please note, this blade is not a mulching blade. This place is designed to cut and q...
In Stock
Order now and your part arrives by Mar 30
$6.51
This item is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal washer is used to provide spacing between the whe...
In Stock
Order now and your part arrives by Mar 30
$6.51
This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resisto...
In Stock
Order now and your part arrives by Mar 30
$24.70
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of r...
In Stock
Order now and your part arrives by Mar 30
$8.96
An authentic replacement part that is specially manufactured for use with Toro lawn mowers. This is the knob that is secured to the heigh-adjustment arm assembly, for correct location and uses make su...
In Stock
Order now and your part arrives by Mar 30
$6.53
This genuine component is supplied directly from the original equipment manufacturer for use with Toro lawn mowers. Its purpose is to secure pivot arm which helps to support mower wheel. This is an id...
In Stock
Order now and your part arrives by Mar 30
$6.51
This is a genuine manufacturer-sourced part which is specially designed for use with Toro snow throwers. It is a standard hardware which is utilized to secure the shoulder screw. Please make sure to r...
In Stock
Order now and your part arrives by Mar 30
$8.38
This is an authentic Toro replacement part manufactured for use with lawnmowers. The shoulder screw is used to secure different part assemblies depending on the model of lawnmower. This shoulder screw...
Special Order
$26.53
This is an authentic Toro replacement part that is sourced from the original manufacturer for use with walk-behind lawnmowers. The metal blade accelerator connects to the blade and the adapter and is ...
In Stock
Order now and your part arrives by Mar 30
$6.51
This is a genuine manufacturer-approved replacement locknut, it is commonly utilised on Toro lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model...
In Stock
Order now and your part arrives by Mar 30
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 20469
Viewing 3 of 3Will Not Start
Fixed by these parts
How to fix it
Cannot pull starter cord out or engine will not turn over
Fixed by these parts
How to fix it
Engine will not idle
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Seikai from MARICOPA, CA
- Parts Used:
- 497680
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel
... Read more
, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dustin from BANGOR, ME
- Parts Used:
- 590508
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Socket set, Wrench set
Leaking gaskets
All the gaskets needed to be replaced on the Briggs 6.75 flathead I was rebuilding. I ported and polished the ports and shaved the eyebrow between the valves and the piston. The gasket set was a perfect fit. It is a monster now. It doesn't sound like a lawnmower engine anymore
Was this instruction helpful to you?
Thank you for voting!