Models
>
21864
21864 (412000000 - 412999999) Toro Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 21864
Viewing 10 of 10
Keep searches simple, eg. "belt" or "pump".
$6.55
This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the contro...
In Stock
Order now and your part arrives by Aug 10
$6.55
This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which i...
In Stock
Order now and your part arrives by Aug 10
$6.55
This item is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from Toro and Lawn Boy. The handle locking knob is used with a bolt to secure th...
In Stock
Order now and your part arrives by Aug 10
$6.51
This is the height adjustment know that is secured to the metal arm that allows user to adjust the cutting height of the mower. It is a high quality replacement part that is specially manufactured for...
In Stock
Order now and your part arrives by Aug 10
$14.13
It is a genuine manufacturer approved replacement part is designed for use with Toro walk-behind lawn mowers. This blade support works as an adapter helping to secure the mower blade. It is made from ...
In Stock
Order now and your part arrives by Aug 10
$9.89
This is an original replacement part manufactured for use with walk-behind lawnmowers. The special pivot arm is used to secure the wheel to the spring arm to allow it to pivot whnen the height is adju...
In Stock
Order now and your part arrives by Aug 10
$6.51
The screw attaches to the housing. This is an OEM part sourced directly from the manufacturer and used in lawn mowers and lawn tractors made by Toro and Lawn Boy. It is made of metal and is sold indiv...
In Stock
Order now and your part arrives by Aug 10
$15.35
It is a genuine item that is supplied by the original equipment manufacturer for use with Toro and Lawn Boy lawn mowers. This is an identical replacement for a missing or a faulty arm-spring that was ...
On Order
$6.51
It is a genuine OEM sourced replacement screw which is specially designed for use with Toro snowblowers. This hardware has multiple applications depending on the model of your unit, please make sure t...
In Stock
Order now and your part arrives by Aug 10
$15.35
This is a genuine manufacturer-supplied component which is specially designed for Toro lawn mowers. It is an identical replacement for a missing or faulty quick release assembly that was originally in...
In Stock
Order now and your part arrives by Aug 10
$6.90
This is an original replacement part manufactured for use with walk-behind lawnmowers. The mount bushing is used to provide spacing for the bolt that mounts the pivot arm and arm spring to the height ...
In Stock
Order now and your part arrives by Aug 10
In Stock
Order now and your part arrives by Aug 10
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ray from YARDLEY, PA
- Parts Used:
- 105-1809
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set, Wrench set
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Was this instruction helpful to you?
Thank you for voting!