Models > 21863

21863 ((400000000-999999999)) Toro Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Washer-Stepped – Part Number: 614426
$3.99
In Stock
Belt-V – Part Number: 91-2258
$27.40
This part includes one V-belt for a lawn mower. It measures approximately 35-inches long and 3/8-inches wide. This drive belt is part of the blade and transmission assembly. The belt can become worn a...
In Stock
Bearing-Ball – Part Number: 104-8699
$4.99
This part includes one ball bearing for a lawn mower. This official OEM replacement part is designed to minimize friction between components that rotate. They help to reduce the amount of wear put on ...
In Stock
Bolt-Shoulder – Part Number: 614650
$4.99
In Stock
Spring – Part Number: 136-7166
$3.99
This is a genuinely made torsion spring, sold as an individual part. It is part of the handle assembly and attaches to the end of the control bar, allowing it to retract. This metal spring can rust, s...
In Stock
Chute-Discharge, Side – Part Number: 115-8447
$18.64
This is a side discharge chute for a lawn mower. It is a genuinely sourced part and is sold individually. Please note that the hinge bracket assembly and spring used to secure this side deflector is n...
In Stock
Traction Cable – Part Number: 115-8435
$37.00
This authentic replacement traction cable is supplied directly from original equipment manufacturer for use on Toro lawn mowers. The traction cable engages drive wheels on the lawn mowers. It is conne...
In Stock
Gear-Pinion, 15T – Part Number: 131-5399
$4.99
In Stock
Guide-Cable – Part Number: 114-7988
$3.99
In Stock
Screw-Taptite – Part Number: 95-1726
$3.99
In Stock
Spring-Torsion – Part Number: 99-5293
$10.44
In Stock
Knob-Hoc – Part Number: 110-0549
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Replacing the Belt-V

Replacing the Belt-V

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ray from YARDLEY, PA
Parts Used:
105-1809
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench set
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.

Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
3 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More