Models
>
20334
20334 (400000000-999999999) Toro Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. Yo...
In Stock
Order now and your part arrives by Apr 2
$6.51
This is an Original Manufacturer Sourced Stepped Washer used on a variety of Push Lawn Mowers. This is the Metal Washer that fits with Rear or Front Wheel Cover depending on the model. It helps secure...
In Stock
Order now and your part arrives by Apr 2
$12.46
This is an authentic side deflector, made from a durable plastic that is black in color. It mounts to the side of the lawnmower and helps to keep the grass under the deck by acting as a door. This tur...
In Stock
Order now and your part arrives by Apr 2
$6.84
This part includes one ball bearing for a lawn mower. This official OEM replacement part is designed to minimize friction between components that rotate. They help to reduce the amount of wear put on ...
In Stock
Order now and your part arrives by Apr 2
$6.51
Genuine Manufacturer Approved replacement part designed for use with some Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. Bolt is 3/8-16 X 3-5/8. It is commonly ...
In Stock
Order now and your part arrives by Apr 2
$6.51
This is a genuinely made torsion spring, sold as an individual part. It is part of the handle assembly and attaches to the end of the control bar, allowing it to retract. This metal spring can rust, s...
In Stock
Order now and your part arrives by Apr 2
$24.96
This is a side discharge chute for a lawn mower. It is a genuinely sourced part and is sold individually. Please note that the hinge bracket assembly and spring used to secure this side deflector is n...
In Stock
Order now and your part arrives by Apr 2
In Stock
Order now and your part arrives by Apr 2
$6.51
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It ...
In Stock
Order now and your part arrives by Apr 2
$43.92
This authentic replacement traction cable is supplied directly from original equipment manufacturer for use on Toro lawn mowers. The traction cable engages drive wheels on the lawn mowers. It is conne...
In Stock
Order now and your part arrives by Apr 2
$7.47
This item has been OEM sourced an is intended to be used with walk-behind lawnmowers from Toro and Lawn Boy. The metal pinion gear attaches the mower\\\'s transaxle and is used to interconnect with th...
In Stock
Order now and your part arrives by Apr 2
$6.51
This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the contro...
In Stock
Order now and your part arrives by Apr 2
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The hub that the mower blade mounts to was broken
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ray from YARDLEY, PA
- Parts Used:
- 105-1809
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set, Wrench set
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Was this instruction helpful to you?
Thank you for voting!