FB13250BS (7085922) Snapper Lawn Mower

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and ...

This replacement switch is a genuine OEM part, not an aftermarket equivalent. It is supplied directly from original equipment manufacturer for Murray riding lawn mowers and tractors. This switch is se...

This hex nut is created for use on lawn and gardening equipment. This is a multi-application nut that depends on the unit and tool you are using. For installation instructions, check the manual provid...

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering sp...

This lock nut is designed to fit lawn mowers and other gardening equipment. It is a multi-use nut with varying applications depending on your tool and model. For installation instructions, refer to th...

This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman lawn tractors. The solenoid support engages and routes the battery electrical supp...

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This is a genuine manufacturer-sourced component which is specially designed for use with Murray riding lawn mowers and garden tractors. It is a standard hardware which may have multiple applications....

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicit...

This is a washer for various lawn and garden equipment. It is a flat washer and requires a 5/16-inch bolt size. Washers are positioned under the head of a nut or bolt to strengthen the connection of two or more parts.

This is a hex nut, and it is found in various outdoor tools and equipment. This nut has 6 sides, and is made entirely of metal. It has a 5/16-inch diameter, and a thread size of 18. This part is most ...