Models > 2618H

2618H Simplicity Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Fuel Filter – Part Number: 394358B
$3.99
Fuel Filter
In Stock
Connector-Hose – Part Number: 692317
$7.06
In Stock
Gasket-Float Bowl – Part Number: 693981
$4.99
In Stock
Gear-Pinion (Plastic and Aluminum Ring Gear) – Part Number: 695708
$7.18
In Stock
Filter-Pre Cleaner – Part Number: 272490S
$5.61
In Stock
Clamp-Hose – Part Number: 791850
$4.99
In Stock
Bowl-Float – Part Number: 796611
$7.06
In Stock
Seal-Dipstick Tube – Part Number: 281370S
$8.91
In Stock
Gasket-Rocker Cover – Part Number: 806039S
$8.09
On Order
Plug--Spark – Part Number: 691043
$6.83
In Stock
Line-Fuel – Part Number: 791745
$10.16
In Stock
Filter-Air Cleaner Cartridge – Part Number: 394018S
$27.55
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
GERALD from CLIO, MI
Parts Used:
691758
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Exhaust push rod
Reverse of how i took broken exhuast value out.
It was simple just watch what you do. Also make sure you lash the value. U tube it.
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dana from HAMMOND, IN
Parts Used:
792006
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Read less
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More