Models > 2718H

2718H Simplicity Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This greased bearing is used on lawn and gardening tools and is sold individually. This part works to reduce friction between rotating parts. This happens when the balls receive the load and spin, whi...
In Stock
Order now and your part arrives by May 9
This is a filter cartridge for the air filter in various lawn equipment. The filter removes dirt, dust, and other debris from entering the carburetor, and contaminating the engine. If the engine in yo...
In Stock
Order now and your part arrives by May 9
This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resisto...
In Stock
Order now and your part arrives by May 9
This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to...
In Stock
Order now and your part arrives by May 9
$11.42
An authentic item that is supplied by the original manufacturer for use with Snapper, Murray and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hood stra...
In Stock
Order now and your part arrives by May 9
$6.51
This is an OEM replacement part, sold individually. This Grommet is an elbow for the crankcase breather tube. These rubber elbows were just a convenient way to make a 90 degree bend back when they us...
In Stock
Order now and your part arrives by May 9
This is the replacement carburetor kit for your small engine, used for outdoor power equipment. The carburetor rebuild kit includes the float, needle, gaskets, and seals that you need to refurbish you...
On Order
$6.51
Genuine OEM replacement Grommet used on Lawn and Garden equipment Engines. This Rubber breather grommet is used as a seal between Breather Assembly and the Breather Tube. Over time rubber grommet may ...
In Stock
Order now and your part arrives by May 9
This manufacturer approved recoil starter pulley is designed for lawn and garden equipment engines. The recoil starter engages the drive cup on the flywheel to start the engine when pulled. This assem...
In Stock
Order now and your part arrives by May 9
This part includes one manufacturer-sourced carburetor diaphragm. A working diaphragm is an essential component of the engine, as it creates an airtight seal, needed for optimal engine performance. Th...
Special Order
Genuine OEM replacement part used on a variety of Engines. This part provides an air tight seal for mounting the Gas Tank. This Gasket is made out of Composite Material and it is Sold Individually. Ov...
In Stock
Order now and your part arrives by May 9
This is a genuine OEM replacement part is made out of Plastic, it is sold individually. It is used on a variety of Engines and Motors. The purpose of it is to filter out dirt and other debris from con...
In Stock
Order now and your part arrives by May 9

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 2718H

Viewing 2 of 2
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Cannot pull starter cord out or engine will not turn over
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Thomas from ALFRED, ME
Parts Used:
397358
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
16 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from MUKWONAGO, WI
Parts Used:
272538S
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
no gas to carb
pulled off fuel pump cover ,cleaned surfaces. Applied gasket sealer and replaced fuel pump diaphragm.
14 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven C from CENTREVILLE, MI
Parts Used:
495606
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Old diaphragm dried up
Tore carburetor off leaf blower and replaced. To do that require taking off the air cleaner removing the gas tank and all the brackets holding the controls on it. And keeping track of all the screws and Wires that control choke and throttle. I took several photographs. I did not need all the gaskets and jet’s that were included in the ki t but it had what I needed.
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!