Models > 96132007902 > Instructions

96132007902 Poulan Lawn Mower - Instructions

Jump to:

All Instructions for the 96132007902
1 - 6 of 6
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jeff from PIEDMONT, SC
Parts Used:
84005272, 799586
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Engine died just a few minutes after running
Changed the spark plug, carburetor, Head gasket,Air filter, but when I replaced the magneto I got real results. So if you have a small engine that dies just as it warms up the magneto may be the problem. Cut my grass finally.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from SPOKANE, WA
Parts Used:
532416860
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Original rear skirt was torn and loose at each end.
Prop up mower with wood blocks just enough to unbolt and remove rear wheels. Flip up spring-loaded rear baffle and prop up with yardstick positioned between baffle and mower push bars. Now you have access to unbolt and replace skirt.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dexter from MAULDIN, SC
Parts Used:
84010941
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
Recoil broke apart
Removed cover then it required removing the broken recoil assembly to replace it with new one. New recoil assembly fit perfectly.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joel from ROSEVILLE, MN
Parts Used:
581547901
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kim from KENNER, LA
Parts Used:
796503
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Screw in new dipstick, check oil level
Very well
4 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 96132007902
1 - 6 of 6